Which connectors and mounts for Little Screamers? - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
May 14, 2005, 01:04 PM
Registered User

Which connectors and mounts for Little Screamers?

What size of bullet type connectors should I use for my Little Screamers motor? Hobby-Lobby has the MP Jet gold connectors that are 1.8mm, are these the ones?
I'm also looking for the best way to mount the motor to a Shockflyer F3A, Hobby-Lobby has instructions that suggest using a plywood ring slightly inset (1") from the front of the fuse. I would then screw the motor using the existing mount to the plywood ring.
Any suggestions?


Sign up now
to remove ads between posts
May 14, 2005, 01:30 PM
Registered User
Dr Kiwi's Avatar
The 1.8mm are rated at 25A so no worries there. The wires from the LS and from, say, a Phoenix 10 are small enough to fit into the connectors - so that would be my choice. For applications with 18ga wire or bigger you need to go to 2.5mm.

The plywood ring and radial mount will be fine. Alternatively, can you cut a slot into which to fit a stick to the Shockflyer? then you could use the LS stick mount.

Cheers, Phil
May 14, 2005, 01:34 PM
Chillin till SEFF
bildo baggins's Avatar
I use the 1.8 mm on mine.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Eurofighter Typhoon for the Little Screamers Park Jet errolw98 Pusher Prop Jet Models 316 Nov 14, 2011 07:11 AM
Discussion Which connectors where for 4 cell lipo @ max 40A krislarsen Batteries and Chargers 6 Aug 03, 2006 04:28 AM
Which connectors for brushless motor leads? rocstar Power Systems 4 Jul 06, 2005 01:33 PM
Deans little black connectors--safe for 280BB? Pat Daily Power Systems 5 Jan 29, 2003 08:17 AM
Which connectors for the Hacker combo Adrian Jeday Electric Heli Talk 8 Dec 29, 2002 12:12 AM