Thread Tools
Apr 08, 2002, 03:55 AM
Registered User

Promax 4011 with 3.7:1 g/box in a HLG


Just a quick enquiry about if it's worthy of putting a promax 4011 in a HLG with a 3.7 : 1 gearbox swinging a 11 x 7 prop.

I have a Robbe planetary gearbox with the Robbe power 4.8 volt sp 400 motor, but I'm hoping to change the motor to a promax 4011 (since the mounting holes are the same as a sp 400) as mentioned by modifying the motor shaft pinion in the gearbox with a slightly larger hole to accomodate the 3.2mm shaft of the promax 4011.

Also being a HLG I'll want to keep things light, so what would be the best batteries with this motor set up. I believe that the 600maH batteries used for sp 400 won't handle the current draw. Is this true and if so what batteries would be better therefore?

Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Aveox 38/36/2 with 3.7:1 G.B. & SH-48 esc Rod Aircraft - Electric - Airplanes (FS/W) 12 Oct 11, 2005 11:49 AM
Ebay: Aveox 1415/3Y with 3.7:1 Gearbox, NIB soareyes Aircraft - Electric - Airplanes (FS/W) 0 May 29, 2004 09:32 AM
Rave Wtd: Planetary 3.7:1 gear box Lewis Adam Aircraft - Electric - Airplanes (FS/W) 0 Jan 27, 2004 08:46 PM
New - Hacker B50-11s Brusless Motor with 6.7:1 gear box! comes with Precision s Joe Pierson Aircraft - Electric - Airplanes (FS/W) 0 Mar 25, 2002 08:31 PM
Aveox 1406/2Y with 3.7:1 Planetary Gearbox (NIB) Ed Lyerly Aircraft - Electric - Airplanes (FS/W) 1 Jan 18, 2002 08:39 PM