Thread Tools
Jul 02, 2020, 08:59 AM
Registered User
Thread OP

Lighting for eflite 2.1 Carbon Cub ss

Plan to put a lighting system in my new Eflight 2.1 Carbon Cub SS. Have ordered the GT Power lighting system for the install. Looks to be very easy to put the lights and controller in the Fuselage. Room to work. I am not sure what the best way is going to be when running leads out to the wing tips.
Hoping someone has tried this addition and has some tips on running the leads through the foam wings. The wings are open out to the aileron servos, then blocked to get into the next opening going to the wing tip.
Any tips or suggestions would be appreciated. Thanks
Last edited by dmohring; Jul 03, 2020 at 02:35 AM.
Sign up now
to remove ads between posts
Jul 02, 2020, 10:08 PM
Registered User
There's a whole thread on this plane, you'd be better off asking there than starting a new thread.!/page57

Quick Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion E-flite Cessna 150 2.1 or E-flite carbon cub SS 2.1?! AnbuPunk 3D Foamies 3 May 28, 2019 12:08 PM
Help! LED Lights from a Carbon Cub SS BWH Scratchbuilt Indoor and Micro Models 2 Aug 31, 2016 05:40 PM
Discussion Getting the UMX Carbon Cub SS ready for maiden Samcassidy Scale ARF/RTF 5 Dec 18, 2015 03:06 PM