Thread Tools
Sep 14, 2020, 09:09 PM
Registered User
just a tad smaller than the Blade 130s, which has 135mm main blades and uses a 3s 350mah battery.
Sign up now
to remove ads between posts
Sep 17, 2020, 11:25 PM
I Love 30mm
FlyinAg's Avatar
https://www.xn--kck9c8a7d.top/items/32053482

Translate to English...
Sep 18, 2020, 12:29 AM
Registered User
Quote:
Originally Posted by FlyinAg
¥200,000?!! I hope that's just a typo or a placeholder.
Sep 18, 2020, 12:31 AM
Slideways at warp speed.......
kiwi_craig's Avatar
Thread OP
place holder until they get stock - real price......
Sep 18, 2020, 12:39 AM
Folding Spacetime
navigator2011's Avatar
Maybe one too many 0s?
Sep 18, 2020, 12:44 AM
Registered User
Any ideas what the actual price will be? If it's close to the E160 it should sell like hotcakes.

Btw that site indicates it coming 2020-10-25, super excited!!!
Sep 18, 2020, 08:04 AM
I Love 30mm
FlyinAg's Avatar
The price on the website I posted is explicitly labeled as a placeholder.
Sep 18, 2020, 08:45 AM
Registered User
Sorry yall, bought an M2 V2 instead, just had to get it. Although the M1 is still a "want" other; bigger projects need the funding.
Sep 18, 2020, 12:57 PM
Folding Spacetime
navigator2011's Avatar
Quote:
Originally Posted by FlyinAg
The price on the website I posted is explicitly labeled as a placeholder.
I think ¥20,000 is a better placeholder.
Sep 19, 2020, 10:18 AM
The Other Side of Your Screen
SilverSport's Avatar
Thanks for the pix and the estimated release date. Hope to get in on a pre-order deal like we had for the S2, may have to break my spending CAP on made in the PRC non necessities, as necessities purchases of only made there items has that near $0 now. But for the quality the M1 appears to maintain in the lineup, I will.

I guess that means the new Habu is totally off for me now!
Sep 19, 2020, 10:45 AM
Registered User
Woga65's Avatar
That‘s exciting news. If it is not too pricey, i could get two of them and make a sub 250 g version of my flying stick.
Sep 19, 2020, 11:19 AM
Registered User
Quote:
Originally Posted by Woga65
That‘s exciting news. If it is not too pricey, i could get two of them and make a sub 250 g version of my flying stick.
That's cool indeed. Do you have a guide on how that was made?
Sep 19, 2020, 12:01 PM
The Other Side of Your Screen
SilverSport's Avatar
Quote:
Originally Posted by Woga65
That‘s exciting news. If it is not too pricey, i could get two of them and make a sub 250 g version of my flying stick.
Now that looks like something a bored quad flyer that needed a challenge equal to or greater than flying warbird would make.

Would love to see how it is flown.
Sep 19, 2020, 04:51 PM
Registered User
Woga65's Avatar
Quote:
Originally Posted by TedAus
That's cool indeed. Do you have a guide on how that was made?
For the moment there is no guide but the build is pretty much straight forward. Apart from the electronics I used two Goblin Fireball kits, a 24 mm carbon tube, some 3D printed parts and two 6s 18650VTC6 batteries.

A while ago the flight controller died midair - bad gyro. After this happened i made a repair video (link below).

Please excuse the awkward intro. It has been my first time, the camera has been staring at me, i did not know where to look and all the words that would have made a good intro were gone.

Quote:
Originally Posted by SilverSport
Now that looks like something a bored quad flyer that needed a challenge equal to or greater than flying warbird would make.

Would love to see how it is flown.
This is exactly what happened, i got bored about quads. Then after suffering a stroke in 2018 i needed to proof to myself that i still can do this and that. So i built some collective pitch quads in 2018 and in 2019 I finally built the flying stick.

Maiden
INAV powered Twin-Rotor-Helicopter - first hop (1 min 10 sec)


Tuning
INAV powered Twin Rotor Helicopter - tuning PID (1 min 57 sec)


Endurance test
INAV powered Twin Rotor Helicopter - first endurance test (14 min 47 sec)


Short flight with the canopies attached
INAV powered Twin Rotor Helicopter (1 min 30 sec)


Repair video
INAV powered Twin Rotor Helicopter - replacing bad FC (13 min 26 sec)


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Balsa USA Bristol M1 sirius80 Glow to Electric Conversions 115 Sep 23, 2020 12:09 PM
New Product Bo Ming Toys M1 - 1X - 5 Flip King Dennis S Mini Multirotor Drones 6 Feb 02, 2016 03:27 PM
Help! Help m1 motor won't spin!!!!! JimmieGoodman Multirotor Drone Electronics 1 Nov 13, 2015 07:27 PM
Help! KK2.1.5 M1 Motor Not Synchronized NGen Multirotor Drone Electronics 3 Oct 27, 2015 06:39 AM
Discussion M1 Garand and M1 Carbine lovers ... logan5 Life, The Universe, and Politics 20 Aug 30, 2013 09:34 PM