For Sale - For Trade - Free to good home, Help I need a (place your item here) quick. - Page 91 - RC Groups
Thread Tools
May 19, 2012, 02:32 PM
Utah Flyers
natetanr's Avatar
CNC Foam Cutter and EPP Foam Sheets

Anyone interested in my cnc cutter? Im wanting to sale it as I dont have much time these days with grad school and other priorites.

Im thinking $600 for the setup, I also have large sheets of EPP Foam If anyone is intested.

It has 6 linear slides,
acme threaded rod,
dumpstercnc antibacklash nuts,
computer and monitor running windows 98,
Pro version of GMFC
Hobby CNC Foam Pro Board
4 stepper motors,
Transformer for wire heat,
Computer power supply to power board.

Text or call me at 458-0522
Sign up now
to remove ads between posts
May 19, 2012, 02:37 PM
ɯoɔ˙sǝıqqoɥɥɔǝʇlɐıɹǝɐ ˙ʍʍʍ
smileyz's Avatar
Do you have a picture of everything your including? I have a buddy that has been looking at them and would be happy to pass on the info.

Mike K.

Quote:
Originally Posted by natetanr
CNC Foam Cutter and EPP Foam Sheets

Anyone interested in my cnc cutter? Im wanting to sale it as I dont have much time these days with grad school and other priorites.

Im thinking $600 for the setup, I also have large sheets of EPP Foam If anyone is intested.

It has 6 linear slides,
acme threaded rod,
dumpstercnc antibacklash nuts,
computer and monitor running windows 98,
Pro version of GMFC
Hobby CNC Foam Pro Board
4 stepper motors,
Transformer for wire heat,
Computer power supply to power board.

Text or call me at 458-0522
May 21, 2012, 01:00 PM
Crash Pilot

Old 40 glow engine and Flight box


I have an old gas powered flight box with a 40 size glow engine, fuel tank, etc. I took the engine off my old avistar trainer and replaced it with a brushless motor, it all worked when I took it off. It is just taking up space here. Includes 12V starter, hand crank fuel pump, etc. Free to good home. Call or text if you would like it. 8015053062
Last edited by lhb009; May 21, 2012 at 01:32 PM. Reason: feeling generous
May 26, 2012, 11:26 AM
Never enough time to fly!
ecase's Avatar

Futaba 8FG Super transmitter and receivers


Well, I am finally trying to sell my almost new transmitter. Its the Futaba 8FG Super. I paid $479 plus freight and I will let it go for $400. I only used it twice. It still has the protective plastic covering on the screen. You can read about it at this site, http://www.futaba-rc.com/systems/futk8010.html .

I also have 3, R6208SB receivers. Two are brand new, in the boxes and one is out of the case but shrink wrapped. I put it in my DLG for the two flights mentioned above. I paid $137 plus freight, each and will sell them for $100 each.

Evan
Jun 05, 2012, 04:47 PM
Registered User
therealhiphop's Avatar

Need to Sell a Few Items


I am not flying as much as I would like to these days and when I do I am mostly doing EDF stuff. Funds are low also so I need to clear some stuff before I can finish some projects.

Fors sale:

CMP Kunlun glider: This is brand new, never-flown, and practically RTF. All you need is your Rx and an ESC.$85.00

CMP T-45 90mm: NIB (Box was open for inspection only). These are sold out. Sale price is $179.00 + shipping. I will let it go to a good home for $150.00.

TBM 71" P-51B (the regular olive color scheme). This has the custom ESM pneumatic retracts installed. Standard Servos. Castle 85 ESC, Monster 160 motor. Retractable tail wheel with doors, two spinners (need to be fitted). $250.00 RTF or $150.00 Airframe only.

No-name P-51D Mustang: This is a beautiful composite airframe with balsa wings. It is a big plane, about 70" WS. This is fixer-upper / glow-to-electric conversion. $50.00.
NOTE: I also have Jeff's crashed Texan II. Since this was free, I would be willing to give it away as an incentive to whomever buys the this Mustang. Otherwise I'll keep both airframes until I get time to fix them.

I thought I'd post here before I put them on KSL.

Will add pictures soon. Thanks for looking.
Jun 20, 2012, 08:11 AM
Some Girls r Bigger thn Others
swps's Avatar
Surprise, surprise, I'm selling some planes on KSL!

http://www.ksl.com/index.php?nid=231&userid=176602

I'll cut any of you guys a good deal if you want one....or two. Need to pay for that new Habu 32 airframe!
Jun 21, 2012, 10:50 AM
Registered User
PMcGibbon's Avatar
**SOLD**

E-Flite Taylorcraft 450 PNP

This plane retails as an ARF for $219 and is on sale at most places for $159. I'm selling mine as a PNP for only $125. Just add your own RX/TX/Battery. It includes the upgraded E-Flite Park 480 brushless motor and E-Flite 40 Amp ESC.

http://www.e-fliterc.com/Products/De...ProdID=EFL2625

Flite Test - E-Flite Taylorcraft 450 - REVIEW (10 min 6 sec)


PM me if you are interested.

Thanks,

Patrick
Last edited by PMcGibbon; Jun 21, 2012 at 05:17 PM. Reason: Sold
Jun 21, 2012, 03:29 PM
Green Fuel Boy

Futaba 8fg


Hi one of the new kids at our RC club is looking for a good radio and receiver. He said he could pay $250. What is your bottom line on the radio.

Thank you
GFB
Jun 21, 2012, 03:39 PM
Never enough time to fly!
ecase's Avatar
Quote:
Originally Posted by Green Fuel Boy
Hi one of the new kids at our RC club is looking for a good radio and receiver. He said he could pay $250. What is your bottom line on the radio.

Thank you
GFB
Sorry, but I can't get even close to $250 on the Futaba. I have reduced the price, but not that low.

But, I do have a Spektrum DX6 I would sell cheap. Not DX6i, but DX6. I have a couple of receivers for it too. If he is flying planes with ailerons, elevator, rudder and motor, it would be great.
Jul 07, 2012, 01:31 PM
Fly, crash, repair, repeat....
BlenderBoy's Avatar
Free to a good home. Kinetic .50. Needs electrics, motor, blades, just an airframe.

Please pm me if you want it.

Jul 09, 2012, 10:11 PM
wheeeeee!
elCapitan's Avatar
Our inexperience = your savings

Buying stuff for four quadcopters, and we got the wrong ESCs. Now there are 16 perfectly good HK SS 25-30A ESCs sitting in a cardboard box in my house.

They're these ones from HK here, and they normally sell for $5.99 each, plus shipping and 1-254 months of wait time from China (at least, it seems like, right?)

We're just looking to make back some of our lost money, so we're selling them for $5.00 each / four for $18 / all 16 for $70.

Please PM if interested

Jul 10, 2012, 02:16 AM
swede
denial15's Avatar
I could use a couple. Put me down for 2.
Jul 22, 2012, 10:27 PM
Registered User
Possible trade for airplane stuff.

I just bought a new 10 inch Queen memory foam mattress for $400 a few weeks ago from Lasting Impressions Foam. It is very nice, just not what I need.

Details here: http://www.lastingimpressionsfoam.co...-Mattress.html

Pics here: http://www.ksl.com/index.php?nid=218&ad=21378593&cat=44

Will trade for guns, guitars, or airplane stuff. (Looking for a Springfield XD9.) Or will sell outright for $200 cash.

Let me know. Thanks.

Justin
916 dash 798 dash 3996 text, call or PM.
Last edited by the_walrus; Jul 23, 2012 at 01:34 PM.
Aug 01, 2012, 04:33 PM
wheeeeee!
elCapitan's Avatar

A couple things


#1) *never used* HK v.3 multi-rotor control board (Atmega 328)
I got this, planning on building a quad with it, but the very next week, they came out with the KK v.2 with the LCD screen, so I bought that and used it instead. This one is perfectly fine, never flown (read never crashed)

Selling it with the USBasp programming device for $22 (normally $24.74+shipping)

specs from the HK website here

----------------------------------------------------------------------------------------------

#2) Also, *never used* HK 70A ESC. Dang planes I never get around to building... didn't even solder connectors on the leads.

$15 (normally $15.62+shipping)

specs from the HK website here
Aug 02, 2012, 01:40 AM
Registered User
therealhiphop's Avatar
Quote:
Originally Posted by elCapitan
#1) *never used* HK v.3 multi-rotor control board (Atmega 328)
I got this, planning on building a quad with it, but the very next week, they came out with the KK v.2 with the LCD screen, so I bought that and used it instead. This one is perfectly fine, never flown (read never crashed)

Selling it with the USBasp programming device for $22 (normally $24.74+shipping)

specs from the HK website here

----------------------------------------------------------------------------------------------

#2) Also, *never used* HK 70A ESC. Dang planes I never get around to building... didn't even solder connectors on the leads.

$15 (normally $15.62+shipping)

specs from the HK website here
I'll take the 60/70 ESC.

Diego


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale For sale or trade RTF good condition slope slayer Mr. Innocent Aircraft - Sailplanes (FS/W) 7 Dec 20, 2005 09:26 AM
Motor for a Global Free Style? Please Help... dklassen Fuel Plane Talk 6 Oct 26, 2003 06:16 PM
3 9x7 props free to a good home CLARKE Aircraft - Electric - Airplanes (FS/W) 4 May 25, 2002 08:26 PM
Free to good home gavoss Aircraft - Electric - Airplanes (FS/W) 2 May 05, 2002 08:49 PM
Free to good home..... pullin-gs Aircraft - Electric - Airplanes (FS/W) 5 Oct 08, 2001 11:56 AM