ToolKitRC M8S Multifunction Charger, Balancer, Servo/Signal Tester
Here's a nice looking charger from ToolKitRC that has very nice color screen and easy to use interface.
News
By Jason Cole |
New Charger System with Fresh UI
Here's a nice looking charger from ToolKitRC that has very nice color screen and easy to use interface. It's more than just a charger though, it also has built-in servo test functions along with power supply functionality and a watt meter. It still does the basics like balance charging, discharging, measuring resistance, pretty much all you need to make sure your batteries continue to stay in tip top shape over their life. You can see the full feature and specification list below.
Check out the ToolKitRC M8S Multifunction Charger Here
Specifications/Features:
- Charger/Discharger and Balancer: Li-poly/LiHV/LiFe/Li-Ion 1-8S, NiMH 1-20S, Pb 1-12S
- Charging Current: Maximum 18A (400W)
- Discharge Current: Recovery Mode 0.1-18A (400W) Normal Mode 0.1-5A (20W)
- Servo Output Tester: PWM, PPM 8ch and S.Bus 18 channel
- Receiver Signal Generator: Signal tester for PWM, PPM and S.Bus
- Motor & ESC power meter 400W/18A with voltage and throttle signal output (Watt Meter)
- Measurement of signal values such as PWM/PPM/ SBUS
- PWM/PPM/SBUS standard signal generator with accuracy up to 1 microseconds
- Customizable stabilized current & voltage power supply (1-30V at 1-18A)
- Integrated USB 2.1A/5V output, charger for mobile devices
- Max Power Output: 400W
- Input Voltage: 7-30V DC
- Battery Type: NiCD, NiMH, Li-poly, Pb
- Min/Max Lipo Cells: 1-8 Cells
- Min/Max NiCD/NiMH: 1-20 Cells
- Charge Current: 0.1-18A (400W)
- Discharge Current: 0.1-5A/18A (20W/400W)
- Display Information: V, Amp, mAh, PWM
- Dimensions: 98mm x 68mm x 35mm
- Weight: 170g
- Cooling System: Built-in Dual Fan
- Interface: USB Port
- Upgradeable: Via USB PC Cable
| Thread Tools |
|
|
||
|
Quote:
|
|
|
|
||
|
|
||
|
|
Quote:
|
|
|
|
||
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Similar Threads | |||||
| Category | Thread | Thread Starter | Forum | Replies | Last Post |
| News | ToolkitRC M8S Charger | Jim T. Graham | Batteries and Chargers | 5 | May 31, 2020 06:23 AM |