Thread Tools
This thread is privately moderated by LD power, who may elect to delete unwanted replies.
May 08, 2020, 01:42 AM
brushless motor for RC hobby
Thread OP
New Product

New inner-run RC car brushless motor


LD-power technology now mainly specialied in the inner-run RC Car brushless motor
Production control
  1. Strictly abide by 6S standard production control
  2. 40 refined process during production
  3. Strictly monitoring while processing
  4. Abiding by ď2 Check, 3 Don't "Principle (Recheck, self-check; Don't use defective material; donít make defective products; Donít outflow defective motors)
  5. Advanced production equipment's: Winding machine , Dynamic balance machine , Magnet Sticking machine , Antioxidant salt spray tester , Rockwell hardness tester , Noise tester , High and low Voltage tester
  6. The fully enclosed load test room
Quality control:
1. Strictly material detection: Unified regulated file drawing
2. Precise test tool: plug gauge , Caliper, micro caliper, flux meter, magnifying glass ,dial indicator, height gauge, gauss meter, puncture tester
3. Over 5% detective material, returning back
4. Monitoring important process: Winding, low-resistance test, insulation and voltage resistance test, sample confirm, balance test
5. 3 lines of defense before shipment: No load test(Current, KV, Balance)
6. Load test: (Current, Thrust, Temperature rise, noise, using life)
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools