Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by jgmtens, who may elect to delete unwanted replies.
Jan 18, 2006, 10:12 AM
Registered User
Try here for the MUSTANG GUNFIGHTER:
http://www.midwaysailor.com/photos/m...unfighter.html

Reuben
Sign up now
to remove ads between posts
Jan 18, 2006, 07:18 PM
Registered User

Gunslinger's Tail Stallion


Mark,
Here's what I did with the tail photo.
I've attached a jpeg image so it will have a blurred edge. If you can use it fine. If not I can send you bmp files as they won't have the blurred edge. I worked up three sizes as bitmaps ~3.5", ~6" and 10.5" tall.

If you want them, PM me with your email addy 'cause bitmaps pics are too large for RC Groups' pics.

-Mike
Jan 19, 2006, 09:52 AM
On patrol.
Cary Reeves's Avatar
Quote:
Originally Posted by FlyByMike
Mark,
Here's what I did with the tail photo.
I've attached a jpeg image so it will have a blurred edge. If you can use it fine. If not I can send you bmp files as they won't have the blurred edge. I worked up three sizes as bitmaps ~3.5", ~6" and 10.5" tall.
Thanks Mike, nice work. Here it is as scaleable vectors. This image just shows what's in the files. The Zip file contains a vector PDF and a vector WMF file both of which are clean and scaleable up or down to any size.
Last edited by Cary Reeves; Jan 19, 2006 at 10:05 AM.
Jan 20, 2006, 06:21 AM
Obviously I'm a "Minus Member"
buzzltyr's Avatar
Mike and Cary, thanks so much! The mustangs are fantastic! I appreciate all of the work and effort that went into the pics. I hope the images can be used by a lot of ezoners, and not just me. Again, my sincerest thanks for some beautiful (and useful) images. My thanks also to Reuben, as I had not found that website with all of the Gunfighter pics. Very helpful, as well.

Mark
Jan 23, 2006, 04:25 PM
Registered User
Big_Bird's Avatar
Watson Propeller
Jan 24, 2006, 01:32 PM
Registered User
Big_Bird's Avatar

VMF-312 The Checkerboard Squadron


Marine Corsair Squadron South Pacific 1944
Jan 24, 2006, 09:20 PM
On patrol.
Cary Reeves's Avatar
Pennzoil Logo
Jan 24, 2006, 09:40 PM
Registered User
Big_Bird's Avatar
Bellanca
Jan 29, 2006, 06:29 PM
On patrol.
Cary Reeves's Avatar
I had a request for flame paint templates at 75% of the last ones I posted and in left and right. BrunswickOH is this what you meant?
Jan 29, 2006, 06:59 PM
Registered User
phillipwells's Avatar
DeHavilland Vampire
Jan 30, 2006, 10:17 AM
On patrol.
Cary Reeves's Avatar
Quote:
Originally Posted by BrunswickOH
Cary, FIRST--thank you very much for taking the time!!! what I was thinking is a slant at the top of the flame (I guess it really doesn't need to be a left and right because I can just cut out a mirror image) but it's going to be painted on the wing surface of a Stryker (Which is basically a foam flying wing) so the leading edge is tapered back at about a 45 degree angle. Does that make sense??

Jim
How about this? These should be exactly 45 degrees. I did a right and left strip so you can see what they will look like. Because of all the intricate cutting involved, I would suggest cutting 2-3 flames in one strip and carefully aligning them as you go with a straight edge. For the other side, just flip the template upside down.

**Edit**
I thought you originally asked for 75% of the original?!? This is the largest I can fit four flames on an 8.5x11 sheet. Check and see if your graphics software or printer driver allows you to adjust the scale also. If you could tell me the exact size in inches you want the flames, I could just make it that size. Give me the length and width of each flame so that it works out the way you want on your wing when they're all ligned up down the le. Also you can give me a precise angle as well 48degrees, 51 degrees or whatever and I can skew them to the correct angle to match your le.

**Edit**
Here are some colored flames for your devastator in case the painting gets to be too big a hassle. Just print on clear label stock, spray with some sort of clear coat (both the rustoleum spray lacquer and the Wal-mart $0.97 clear seem to work fine) for durabilty, then cut out and stick them on. If you cut a 1/2 inch or more in front of the leading edge you can wrap the le with the label material.
Last edited by Cary Reeves; Jan 30, 2006 at 10:42 PM.
Feb 02, 2006, 08:25 PM
G G Ghost Pirates !!!
Vyceroy's Avatar
Correct link for Luftwaffe emblems
Feb 06, 2006, 02:59 PM
Registered User

FW decals


Mike try here :

http://www.rc-network.de/magazin/art...0040-01.html#1

go to the bottom of the list

Reuben
Feb 19, 2006, 04:31 PM
Registered User
Big_Bird's Avatar
Here are two Hartzell propeller decals.
Last edited by Big_Bird; Mar 05, 2006 at 08:28 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Whoops! "LIFT HERE" Decals for 1:12 scale Sopwiths B7270 Scale Kit/Scratch Built 4 Mar 13, 2008 08:29 PM
Decals for Quarter Scale Cub Ken Eddon Giant Scale Airplanes 2 Jul 25, 2004 02:30 AM
Decals for a 1/12 scale Tucano???? Mountain man Scale Kit/Scratch Built 15 Jun 07, 2004 05:06 AM