Thread Tools
This thread is privately moderated by GroundControlRC, who may elect to delete unwanted replies.
Mar 24, 2020, 10:43 AM
Registered User
Thread OP
Video

DustOff Flight #9 - Highly Modified Brushless WLToys F949 Cessna 182




DustOff Flight #9 - Highly Modified Brushless WLToys F949 Cessna 182

Let's knock some of the Dust Off of this Micro Cessna.

Here is a link to the Video:
https://www.youtube.com/watch?v=xe7aOmQD0xM

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #BrushlessConversion #Cessna182 #WLToysF949

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Here are links to all the Components used in the Brushless Conversion:

***Make sure you select a Receiver that supports your Transmitter Protocol - I chose this DSMX/DSM2 Receiver for my Transmitter
2.4G 4CH Micro Low Voltage DSM2 DSMX Compatible Receiver Built-in Brushed ESC
https://www.banggood.com/2_4G-4CH-Mi...47791920140372

Racerstar Racing Edition BR1306 3100KV 1-2S Brushless Motor - Clockwise Screw Thread
https://www.banggood.com/Racerstar-1...47791920140372

HK-5320S Ultra-Micro Digital Servo 0.075kg / 0.09sec / 1.7g
https://hobbyking.com/en_us/hk-5320-...asc=4085774970

Turnigy MultiStar Race Spec 7A BLHeli-S ESC 1~2s (Opto)
https://hobbyking.com/en_us/blheli-s...asc=4184097243

GWS EP Propeller (DD-4025 102x64mm) green (6pcs/set)
https://hobbyking.com/en_us/gws-ep-p...asc=8406213277

Pololu Adjustable Step-Up/Step-Down Voltage Regulator S7V8A
https://www.pololu.com/product/2118


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC™ Glue & Fly™ Series Scratch-Build Planes

Consider Supporting Our Channel by becoming a Patron at: https://www.patreon.com/groundcontrolrc
Patrons of the Channel will have access to the latest Aircraft Plans & Exclusive Content!

See Us On Youtube | Patreon | RCGroups

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools