Thread Tools
This thread is privately moderated by fastmax, who may elect to delete unwanted replies.
Feb 25, 2020, 08:22 AM
Time For Me To Fly!
fastmax's Avatar
Thread OP
Build Log

75mm 1S Brushless Whoop Backyard Flyer

With spring right around the corner I figured it was time to put together a new backyard bird. 1S Whoops are my favorite for my small half acre backyard, and my old Beta75 has quite a few miles on it so I decided to start this spring with a fresh build.

I was hoping to put together a couple new Whoops with my current budget, so the hunt for some inexpensive parts began. I came across this frame on Amazon that included a set of props for only $5.99 so in the cart it went. RCG member KadosMicroMotors recently had a big sale on some Whoop parts, so I was able to get some new BetaFPV 0703 15000kv motors from him for quite cheap in the RCG classifieds. Control is handled by a BetaFPV F4 1-2s AIO and camera/vTX is an AKK A5 on this 3D printed mount from Thingiverse. I power all of my Whoops with GNB batteries, and this one like my other 75mm is running on these 450mah 1S batts.

Everything went together butter smooth, and last nights indoor maiden was a success! Now I just need to beat the incoming snow storm and get it outside for a real flight, and some DVR footage.
Last edited by fastmax; Mar 01, 2020 at 04:26 PM.
Sign up now
to remove ads between posts

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Happymodel Snapper7 75mm and Snapper6 65mm Crazybee F3 AIO Brushless 1S Whoop sevet Micro Multirotor Drones 74 Mar 25, 2019 04:06 PM