Pusher foamie with e 9x7 prop, possible? - RC Groups
Thread Tools
Mar 27, 2005, 01:58 PM
Eventually...I will fly

Pusher foamie with e 9x7 prop, possible?

Is it posssible to build a pusher with a EPS350 and a 9x7 prop, but not as a twin boom plane but somthing very simple.
Sign up now
to remove ads between posts
Mar 27, 2005, 02:27 PM
Lance Armstrong- 7 times!
flybike's Avatar
Definitely. Hippo's Frog sounds like exactly what you need. I cant remember his website right now, but I'm sure someone will.

Here's a picture of something kind of similar, with the motor behind the wing.

Mar 27, 2005, 02:29 PM
Registered User
A delta with a fuselage pod to put the battery forward of the wing shouldn't be too difficult to get flying.

I've got an Electrajet that I flew for a while, then put away since it didn't perform (in stock form) as well as the bluecor foamies I was building. After I bought my first brushless motor, I was looking for a testbed and pulled the Electrajet out of storage. The climb, with a 3 cell Li-Po, was just unbelieveable after years of flying mainly direct drive speed 400's and speed 280's. With an 8x8 prop, it's a screamer (I'm a bit worried that the model might not hold up, and I have had control hinges coming loose), but trimming to compensate for the torque from the brushless and large prop can be a problem.

Try a search for the Pibros plans, scale them up a bit (maybe 45 inch span?), and add a battery pod to the nose.
Mar 27, 2005, 02:34 PM
Registered User

I was thinking simple to build, not simple to fly. The Frog would be a much better plane for a less experienced pilot, and I think they have been flown with the EPS350.

I think the website is
Mar 27, 2005, 03:16 PM
Registered Lurker
Nethole's Avatar
EWO's F-16 would fit the bill as well. Though only with Lipos. It couldn't happen the weight of an 8 pack of KAN nimhs.
Mar 27, 2005, 05:44 PM
HELL no you cant fly it!
lift off's Avatar
https://www.rcgroups.com/forums/show...t=zizzi+boomer this uses a 9x7, mine was made for an ips drive but if you made the wing slightly longer you could easily put a eps 350 in it

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion FFF pusher with A/E/T or A/E/R/T HALF-LIFE Foamies (Kits) 2 Jul 19, 2006 08:11 AM
AXI 2808/20 with APC 9x7.5 slowfly prop Firefly_too Power Systems 9 Oct 26, 2005 11:42 PM
What's the perfect prop to use with the E-Flite 370 1360 QuietRiot Power Systems 0 Jan 30, 2005 09:45 PM
Beaver rocks with a gws 9x7 prop pc_pilot Parkflyers 2 Oct 22, 2002 02:33 PM
Geared 280 with 9x7 prop S55 Power Systems 6 May 22, 2002 12:57 AM