Thread Tools
This thread is privately moderated by fastmax, who may elect to delete unwanted replies.
Jan 03, 2020, 05:39 PM
Time For Me To Fly!
fastmax's Avatar
Thread OP
Build Log

StormWhooper BetaFPV Silverware RakonHeli 64mm Whoop Build


The idea for this build was to create something that resembled the ever popular Stormtroopers, and be a build that would be great for flying through my tight basement Whoop course. Since I already have a couple brushless, and 716 powered Whoops, I figured for this one I'd go a slightly different route and do a 615 build.

This is the end result, and I like to call it the Stormwhooper With the 17500kv motors, and the NBD Venom bi-blade props it's just about the perfect speed for the size of my course.

My camera arrived DOA so I'm waiting on the replacement to get here from Amazon. I'll update with a couple pics once it is here and installed.

The Stormtrooper (if you can call it that) helmet canopy is just some bits of 3M vinyl I cut and stuck on there

The Kwad is built on the RakonHeli 64mm Frame. Control is handled by a BetaFPV Silverware FC. Power comes from CrazePony 615 17,500kv motors, and NewBeeDrone Venom bi-blade props. The canopy is just a basic BetaFPV canopy, and it will be housing a TurboWing Cyclops 25mw AIO Cam/VTX. I mount the camera and VTX in my Whoop builds using these 3D printed mounts.

Here are some pics. I will get some flight video and DVR footage as soon as I can. Happy Flying!!
Last edited by fastmax; Jan 03, 2020 at 05:44 PM.
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product BetaFPV Brushless Silverware FC MultirotorDrones Micro Multirotor Drones 2 Sep 28, 2019 12:26 AM
Help! Brushless Silverware on BetaFPV lite v1.0 ESC problem ansics Multirotor Drone Electronics 1 Jul 13, 2019 05:36 AM
New Product Betafpv lite FC ready loaded with silverware for acro whoop toys nigelsheffield Multirotor Drone Electronics 46 Dec 02, 2018 04:03 PM