Best Digital TR servo for Eolo - RC Groups
Thread Tools
Mar 13, 2005, 07:16 PM
Registered User
Last Chance's Avatar
Question

Best Digital TR servo for Eolo


I am setting up my new Eolo Spirit and was thinking of going to a digital servo for the TR but dont really have a clue what is the best one for the job. Anyone using a digital setup or have any opinions?

Aaron
Sign up now
to remove ads between posts
Mar 13, 2005, 09:08 PM
Your attitude is your alt
Gary Morris's Avatar
I have the futaba digital servo it's a 9253? I can't remember for sure but I think that's right. The HS-81 would do nothing but wag, wag, wag! I installed the Futaba digital from www.towerhobbies.com and it works like a champ. A word of caution, if you plan on using a digital servo and lipolys you will need a UBEC unless your using a Kontronics ESC. Digital servos use alot more current than standard servos so be forewarned.

Gary
Mar 13, 2005, 09:47 PM
Registered User
The best is probably a Volz Speed-Maxx XP.

I haven't used it yet, but I think mikefaith has one...maybe he will post.

The Futaba S9253/S9254 is a bit big for the Eolo.

Toshi
Mar 13, 2005, 09:52 PM
Lehner rules!
I have 9254 on my Eolo Pro SE with micro CSM gyro and the tail is rock solid. You can see pictures of my heli + setup here: http://www.runryder.com/helicopter/t161923p1/

If you have 3S2P or 6S batts at the front (not under, but also see pics in above thread) of the heli it will balance fine.

I do agree though that the Volz servo might be even better as it is lighter.
Mar 13, 2005, 10:23 PM
3dmp "It's Magical"
mikefaith's Avatar
I am using 2 Volz Mini-Maxx XP servos for the cyclic and a S9294 in combination with a 401 gyro for the tail. The Volz servos are excellent and provide quick and very accurate response. Here's pic .

Mike
Mar 14, 2005, 06:51 AM
Registered User
CustomPC's Avatar
I replaced my HS81 with a Futaba 9253 and have never looked back. Tail is rock solid.

Yes, it's a full size servo but it fits the Robbe servo mount just fine. The 9254 is faster and and stronger but is heavier.
Mar 14, 2005, 07:05 AM
A man with too many toys
Another vote for the S9253.

.
Mar 15, 2005, 03:26 AM
Registered User
What about the *Multiplex Mini Polo Digi 4 also from Tower? They look promising, has anybody tried them all around on the Eolo


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Best Digital Tail Servo for Trex using GY401? Trex Fanatic Mini Helis 46 May 20, 2007 12:33 AM
Question Need Digital Steering Servo for RC18T FAST! dserratt Micro Cars 1 Dec 24, 2005 09:54 PM
Best digital tail servo??? gorn Micro Helis 5 Sep 26, 2005 02:15 PM
The Best Sub Micro Servo for tail rotor? Charlie1 Micro Helis 2 Sep 08, 2005 09:08 AM
Help my choose a digital tail servo for my Rex guys wildstallion Mini Helis 4 Apr 24, 2005 08:46 PM