Thread Tools
Nov 11, 2019, 03:54 AM
Drones + Cloud !
MultirotorDrones's Avatar
Thread OP
New Product

HappyModel Mobula6




Please read carefully the review and PID tuning (Betaflight/Emuflight).

MOBULA6 PID for BETAFLIGHT 4.2 AND EMUFLIGHT

Remove the jello of the mobula6

Mobula6 light + venom v2 props + no jello + BF4.2 without RPM filtering (2 min 17 sec)



The mobula6 is available in two versions: 19kv and 25kv

Increase the flight time of your mobula6 (4 minutes) by following this tutorial.
  • 79$ , use the coupon 'BG12mb6' to get 12% reduction on Banggood
  • 65mm wheelbase
  • 0802 25000kv
  • Crazybee F4 with built in vtx
  • Runcam Nano 3
  • PH2.0
  • 20g

Better props



HQ31x3 seems to have better performance and grip compared to the Gemfan 1619 (the default one)
HQ Micro Whoop 31x3 - 25000kv Mobula6 with PMB Emuflight (1 min 8 sec)


Extended receiver range

Extend the SPI receiver
TBS Crossfire

Flights

HQ Micro Whoop 31x3 Props (1 min 9 sec)

Mobula6: More than 4 minutes of flight (4 min 11 sec)

No more 5 inch: Mobula6 with Emuflight and PID from Project Mockingbird (5 min 25 sec)

Happymodel Mobula6 25000kv (1 min 11 sec)

MOBULA 6 FREESTYLE // LOOPZ FLYING INDOORS (2 min 41 sec)

Happymodel New Mobula 6 1S 25000kv 3mn flight time (1 min 4 sec)

The Original Mobula6 , Pure flight and Extreme light 1S 65mm Brushless whoop (2 min 35 sec)

Mobula6 1S 65mm whoop Regular edition 19K motor 4 minutes ACRO indoor (4 min 7 sec)


Reviews
Happymodel Mobula6 65mm Whoop Review 😍 (22 min 18 sec)
Last edited by MultirotorDrones; Jul 01, 2020 at 03:48 AM.
Sign up now
to remove ads between posts
Nov 11, 2019, 09:18 AM
Prefectionist
What receivers will be available? will they too be integrated?
Nov 11, 2019, 03:08 PM
Just an earth-bound misfit
My 65 with the 802/16kvs on doubled up 300mAh gets consistent solid 5 minute flights. I can get 5 minutes on 1S, but it feels a bit underpowered. I ordered a set of the 25000kvs, and some GNB 350 HVs for those, and hope I can get pushing my 5 minute mark on 1S again. Shutterbug was getting 5 minute, or close to on the 19000kvs on his 65, and that seemed to zip around pretty good . . . If the 25s don't get at least a good 4 minutes, will probably switch again over to those. For me, 2 minute flights aren't even worth sticking a battery in the quad. I like flying a lot more than changing batteries.

This past Summer in an email from Grayson Hobby, they had a pic with a bunch of new Mobulas and boxes that said Mobula 7 & Mobula 6 on the graphics. I emailed Xinte and asked about the 65, and they replied probably a Fall release. Beside my Mobula, I have another 5 Whoops and PIcks with Crazybees, and gathering parts and looking at 1 more. I am "pro-Crazybee" but . . . I sure do hope they stepped up their QC on this new Crazybee board. I probably have as many n/g Crazybees as working ones, and even with their "new" v3, I'm only batting .500 . . . Xinte has been great making HM look good and have replaced every one of the dead boards for me n/c.

I wonder if they'll have options for the motors on this. They make their 802s in a LOT of flavors and would be easy for them to do. Besides just being a great brushless Whoop, the biggest thing I like about my Mobula is the awesome flight times. It would be a shame to shoot that down with it's baby brother . . .
Last edited by Brian_OH; Nov 12, 2019 at 03:35 AM.
Nov 12, 2019, 09:15 PM
FPV Ground Pounder
Gramps50's Avatar
That looks like a UR65 frame but I think most of the 65mm frame look pretty much the same. Hope the frame has better duriabllty than the US65 frame it was junk I broke it within an day & replaced it with a UR65 frame which is still going strong.
Looks like it has decent range, was flying around the building without issue. Looks like it would be an interesting inside flyer. I think the QC on all this small stuff needs improving. I really haven't had much luck with any of them.
What's the price point of this?
Nov 12, 2019, 09:55 PM
Just an earth-bound misfit
Probably used their BWhoop 65 frame. That's what I used for mine, fits their 802s fine and battery bay is meant for 1S.

For what the Mobula is still selling for, and what they sold their Sailfly and Larva for, with their bigger motors & even vTX w/DVR, I wouldn't think their standard kit, with the bigger battery charger would be any more than $80 . . . which also puts it a good $20 less than the new 65 Beta . . .
Nov 13, 2019, 05:01 AM
Drones + Cloud !
MultirotorDrones's Avatar
Thread OP
Available on banggood for 79$
Nov 13, 2019, 09:07 AM
Registered User
Temporal Flux's Avatar
I like that they added a 19000Kv option. 25000Kv is far too high, in my opinion. We need to let battery technology catch up.
Nov 13, 2019, 09:21 AM
Registered User
that seems a lot more reasonable.
Nov 13, 2019, 10:13 AM
Registered User
Gimme dem guts. Could care less bout this quad but I want dem guts!
Nov 13, 2019, 10:22 AM
FPV Ground Pounder
Gramps50's Avatar
Makerfire also has them for $79
Nov 13, 2019, 10:46 AM
Registered User
Looks like it’s using the runcam nano 3
Nov 13, 2019, 10:48 AM
Registered User
Picture of camera / vtx

Edit : duh just read the description up top lol
Nov 13, 2019, 10:57 AM
Registered User
that level of integration is a thing of beauty. I wish they had complete mounting holes, not the semi circle ones.
Nov 13, 2019, 11:00 AM
Registered User
runcam doesn't have anything on their web site about the nano 3.
Nov 13, 2019, 11:06 AM
Registered User
Temporal Flux's Avatar
Quote:
Originally Posted by derelicte
runcam doesn't have anything on their web site about the nano 3.
That is not unusual. Many of their products often are listed on Banggood or AliExpress before they ever appear on the RunCam website. And sometimes, some reviewers will get them before they appear on Banggood.


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Happymodel Mantis85 85mm FPV Racing Drone smg24 Banggood.com 2 Dec 13, 2017 03:51 PM
New Product Happymodel Toad 90mm Micro FPV 3K Carbon Fiber Frame Kit with CNC Aluminum Cam Mount Livershifter Micro Multirotor Drones 1 Jul 14, 2017 03:32 PM
News Happymodel VMR40 5.8G Mobile Video Receiver Matt Gunn FPV Talk 34 Jul 04, 2017 03:44 AM
Discussion happymodel neo-m8n-1 PINOUT help. flybytim Multirotor Drone Electronics 1 Apr 16, 2016 01:12 PM
Discussion Happymodel Ready to Use Gopro3 Brushless Gimbal No Program Needed copterstar Multirotor Drone Talk 2 Jul 29, 2013 10:07 PM