Thread Tools
Dec 09, 2019, 07:48 AM
Fly and let Fly!
Cocg's Avatar
Quote:
Originally Posted by urrl
Not the prettiest. I used a soldering iron from the inside to clear out enough foam from the inside so the lenses of the cam would poke through. A proper dremel tool would have done a much better job. A dull exacto knife made the hole. A small black strip of velcro on the inside ledge for the base of the cam holds it in place.
Similar to what I did with WR 737 FedEx... Full Emergency door.. (Although no flights and shots yet)
Sign up now
to remove ads between posts
Dec 09, 2019, 07:53 AM
Registered User
glider304guider's Avatar
Quote:
Originally Posted by Boost Lee
Has anyone tried to run two 6s batts in parallel? i have a bunch of 3300 and 4300 35c 6s batts i use in my FW F-16. Urrl can you please post a picture of that camera placement of the wing and nacelle angle?
I'm thinking about doing the same thing. Think I can actually squeeze in two 5000mah packs side by side. Wondering if anyone has tried it yet, as well. Could get 6-7 minute flight times with 10,000mah.
Dec 09, 2019, 10:05 AM
Registered User
Go4it's Avatar
Quote:
Originally Posted by Cocg
Similar to what I did with WR 737 FedEx... Full Emergency door.. (Although no flights and shots yet)

What did you use to cut the door out? Nice job
Dec 09, 2019, 11:15 AM
XPQ-38 Space Modulator
The Hack's Avatar
Bad weather so it wasnít conducive to a maiden. I did 80 amp reverseing speed controls and they work far better than expected. Have a video of moving in reverse and a rolling reverse thrust stop but it wonít upload. Wait for better weather.
Dec 09, 2019, 11:47 AM
XPQ-38 Space Modulator
The Hack's Avatar
Quote:
Originally Posted by glider304guider
I'm thinking about doing the same thing. Think I can actually squeeze in two 5000mah packs side by side. Wondering if anyone has tried it yet, as well. Could get 6-7 minute flight times with 10,000mah.
Somewhere back in this thread of maybe on Hobby Squalk Alpha mentions testing with 2 6000ís. My HobbyStar 6200ís fit beautifully with lots of room to find CG. Probably have to extend the wood battery tray back but plenty of room. I plan to maiden with one. After everything is acceptable move in the second one and give it a whirl.
Dec 09, 2019, 11:57 AM
Registered User
avanti127's Avatar
Very Nice!
Dec 09, 2019, 02:56 PM
Registered User
mshagg2's Avatar
Quote:
Originally Posted by The Hack
Bad weather so it wasnít conducive to a maiden. I did 80 amp reverseing speed controls and they work far better than expected. Have a video of moving in reverse and a rolling reverse thrust stop but it wonít upload. Wait for better weather.
They'd give you an Australian passport for that effort. Amazing.
Dec 09, 2019, 03:16 PM
Mach One
captain MoMo's Avatar
Quote:
Originally Posted by Cocg
Similar to what I did with WR 737 FedEx... Full Emergency door.. (Although no flights and shots yet)
This is exactly what I had in mind But I am a month or more away as I have been very busy work wise....
Latest blog entry: ESC and BEC Steup
Dec 09, 2019, 05:07 PM
Registered User
I need a favor from my Aviation experts. Are the wings a different color than the fuselage on American Airlines 737's?
Dec 09, 2019, 05:43 PM
Where did that tree come from?
urrl's Avatar
Looks to be a very light grey to me.
Dec 09, 2019, 05:44 PM
Registered User
R.M. Gellart's Avatar
Quote:
Originally Posted by Boost Lee
I need a favor from my Aviation experts. Are the wings a different color than the fuselage on American Airlines 737's?
There are a couple greys, polished metal, etc. especially compared to the pearling white of the fuse.

Marx
Dec 09, 2019, 06:19 PM
Where did that tree come from?
urrl's Avatar
All set to test fly with sound card tomorrow. Two speakers (transducers) in fuselage.
Dec 09, 2019, 06:19 PM
I Used To Have More Free Time!
Soon to be my Fed Ex express... 3 coats of purple and grey paint. Still need to paint on the grey underside of the belly.
Dec 09, 2019, 08:42 PM
Registered RC NUT!
The Snake's Avatar
Thread OP

Mango Airlines livery


The freewing AL37 Mango Airlines livery is officially completed ready for a final clear coat soon! Thank you again my wife for your patience! Thank you Callie SodenCallie for making me look good! Thanks motion RC! Thanks Alpha for design in such beautiful airliner!

The freewing AL37 Mango Airlines livery (1 min 33 sec)
Dec 09, 2019, 08:54 PM
Foam addict
4stripes's Avatar
Great job!
How is the orange base done?


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Freewing 90mm F/A-18C 90mm EDF Jet - Official Thread [email protected] Foamy EDFs 3659 Jan 18, 2020 08:46 AM
Discussion Super Airliner Twin 70MM Fans JetA320 Foamy EDFs 10 Sep 27, 2009 10:04 AM
Discussion Super Airline With Twin 70MM Fans JetA320 Electric Ducted Fan Jet Talk 30 Aug 29, 2009 11:12 AM
DC-9 Airliner for EDF-50BH - Official Build Thread Hawker Electric Ducted Fan Jet Talk 77 May 29, 2007 09:54 PM