Thread Tools
Sep 23, 2019, 10:27 AM
Registered User
Thread OP
Discussion

Blade 300 CFX needs help


Hi,
I am new to Heli and I need help on my 300 CFX swash leveling.
I crashed my 330 CFX and needed to replaced servos. I replaced the servos and here is the weird things.
Here is the steps that needs to level the swashplate, correct me if I am wrong.
1. Connect battery and system initialize
2. Disconnect 2 wires of motors to ESC
3. Put on stunt mode
4. Move throttle stick to middle( 50 at pitch curve)
5. Mechanical adjust servo arms 90 degree as much as possible
6. Go to subtrim and make servo arms perfect 90 degree

Here is the weird thing, during subtrim, I observed that if I subtrim aileron servo, the pitch and elevator servos also move as well.
If I subtrim pitch servo, airleron and elevator servos also move.
I am using stock 7200BX flybarless controller that came with heli when I purchased.

Any feedback is very appreciate.

Jason
Sign up now
to remove ads between posts
Sep 24, 2019, 03:41 AM
Registered User
Cyclone 7's Avatar
See response to your 'cross-post' in Electric Heli Talk.


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question NEED HELP new 270 cfx for $300 or used 300CFX for $200 in pristine cond NEE1 Electric Heli Talk 14 Jul 17, 2017 08:17 AM
Discussion Blade 300 CFX DX6I Setup LANDING!!! Beginner Training Area (Heli-Electric) 3 Feb 02, 2017 07:43 PM
Help! Wanted : Blade 300 CFX sushimackrc Electric Heli Talk 0 Jan 31, 2016 12:01 PM
Discussion Need help with Blade 360 CFX to DX6 radio johnathansmith69 Electric Heli Talk 2 Dec 10, 2015 09:54 PM
News Blade 300 CFX BNF Basic Jason Cole Electric Heli Talk 1 Feb 06, 2014 01:14 PM