Thread Tools
Sep 18, 2019, 12:14 PM
Registered User
Thread OP
Discussion

Video Interference at 1 Second Interval


I just got a full speed toothpick pro. Upon setting it up I've found a problem I've never encountered before. I get a change (worse) in video Interference occuring at approx 1 second intervals. 1 second worse 1 second better etc etc. It's very regular and never changes. It doesn't matter what channel, power, armed, motors spinning or not, tx on or off, etc.
I have verified it's not environmental but testing several other quads in the same location as well as moving this one to a different location. I tried different goggles as well.
I've been flying for a while now and have a dozen quads. I've never run into this before.
I'm hoping someone else has seen this and has insight.

Thanks!
Sign up now
to remove ads between posts


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need to make a 12v electronic switch with 2-5 second interval ozief16 DIY Electronics 7 Oct 13, 2016 09:33 AM
Help! HK401b Gyro flashing red on off 1 sec intervals sollo80 Car Talk 2 Apr 27, 2016 07:22 PM
Discussion P3P dji app, time lapse interval minimum to 10 seconds Ferradal.FCG Aerial Photography 0 Sep 07, 2015 03:58 AM
Help! Terrible problems with 1.28GHz video interfering with UHF Equiptment! Kahuna717 FPV Talk 75 Aug 08, 2012 06:27 PM
Discussion 72mhz amped interfering with 1.2 video? WBFlyer FPV Talk 15 Dec 25, 2011 01:48 AM