Thread Tools
This thread is privately moderated by SteveT., who may elect to delete unwanted replies.
Sep 16, 2019, 09:44 PM
Trader Rating: 127
I fly, therefore, I crash!!!
SteveT.'s Avatar
Thread OP
$110.00 USD
Seller Pays Shipping
For Sale

Laser cut 'Lil Salty' tug kits. New sale price..

I am having a sale on this tug kit. The next five kits old will be sold at $110.00 including USPS Priority mail shipping!!

With the kind permission of the designer 'JayJay76', i am cutting and selling laser cut kits of the 'Lil Salty' Tugboat. This is the 21" version. You can find the thread for it here, where you will also find the plans (a copy of which will be included). I have made a couple of small changes to it, in that I have made the walls of the cabin have tabs that fit into notches to make it easier to align and glue together. This is shown in the second photo. Unfortunately, my laser is just a little too short to cut to full length so I have done 'finger joints' which allows the pieces that are too long to be easy glued together, and once glued, sanded and finished will not be seen. I have also made the bottom of the hull out of 1/16" ply instead of 1/32" as the bow post was already notched for 1/16". I have also laser engraved the deck, so you do not have to do it with a scribe. I have also included a hatch in the rear for access to the rudder servo, which is not shown on the plans, but was discussed in the thread. Lastly, though not shown in the first photo, I am including an exhaust stack.

I have added some photos of one of the kits that I am building for my grandson..

Ok.. so,, I have been in touch with Harbor Models, and talked to Nick (I believe he is the owner) about a power system for Lil Salty, and here is what he came up with..

Prop Shaft: (choose the 4mm option)
Prop: (choose left hand, 4mm shaft)
Coupler: (end1=1/8 end2=4mm)
Speed Control:

These seem like reasonable prices and good equipment for the boat.

He also has a jet drive that may work for it at $80.00 as shown in the last photo. This has a reversing 'bucket' so is quite nice.

First photo is from JayJay76's thread.

The price includes Priority shipping in the conus..

Please PM for more info, and also my PayPal info.

Thanks for looking..

Last edited by SteveT.; Sep 26, 2019 at 02:43 PM.
Sign up now
to remove ads between posts
Sep 17, 2019, 05:56 PM
Trader Rating: 320
AMA 670207
Rudderman98's Avatar
A wonderful little kit!

This will be my winter build.

It's larger than I thought and the lazer cut parts are very nice!

Thanks Steve

Sep 17, 2019, 11:01 PM
Trader Rating: 127
I fly, therefore, I crash!!!
SteveT.'s Avatar
Thread OP
Thank you sir!! I appreciate you kind comments!!

Latest blog entry: My shop....
Oct 01, 2019, 10:36 AM
Trader Rating: 1
Registered User
JayJay76's Avatar
Just thought I'd stop in to endorse these kits.

SteveT sent one to me to preview, and I can confirm that he's done a superb job of laser cutting and used really nice quality materials. Part fit is really good and the level of detail included is very impressive.

It's an honor to see my plans kitted with such excellent quality!

Good luck Steve!


Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Laser Cut 'Lil Salty' Tugboat kits SteveT. Boats (FS/W) 6 Sep 08, 2019 01:28 AM
Help! Who is the designer of the `Lil Salty' Tug? SteveT. Dock Talk 9 Aug 24, 2019 10:20 AM
Question Motor and ESC for Lil Salty escipion Dock Talk 4 Apr 18, 2018 03:48 PM
Discussion Building LIL SALTY----Questions Whiteair Scale Boats 3 Aug 31, 2017 06:02 PM
Sold 94" Nick Ziroli P40 Laser Cut Full Kit by Precision Cut Kits with Plans Whitman Flyers Aircraft - Fuel - Airplanes (FS/W) 4 May 30, 2017 07:48 PM