Thread Tools
This thread is privately moderated by Badgerfarm, who may elect to delete unwanted replies.
Sep 15, 2019, 10:34 AM
Trader Rating: 6
Registered User
Thread OP
Sold

Wanted GMP part


I could really use a cooling fan that looks like this.
Sign up now
to remove ads between posts
Sep 15, 2019, 01:11 PM
Trader Rating: 1
Registered User
That could be 3d printed for sure, just a matter of finding someone to do it
Sep 15, 2019, 02:46 PM
Trader Rating: 34
Registered User
v22chap's Avatar
It has a special brass collet receptical inside it ... that would be hard to print into it I would think .

Hi Randall ,, is this for a .50 or .60 ,,, or were they both the same ... some where i think I had an extra one from my old cobra .. when I went from .40 to . 50 size motor or something >>>???
Last edited by v22chap; Sep 15, 2019 at 03:44 PM.
Sep 15, 2019, 03:06 PM
Trader Rating: 1
Registered User
Well if course, that brass piece needs to be made on a lathe.
At any rate, hopefully you can find a good fan...
Sep 15, 2019, 05:51 PM
Trader Rating: 6
Registered User
Thread OP
Hi Larry,

If you have one it would be great. Please let me know. It would be for a .40 or .45 size but I wouldn't turn a larger one down. I can always find a home for it.
Sep 17, 2019, 12:34 AM
Trader Rating: 43
Registered User
exf3bguy's Avatar
That fan was actually made by Hirobo, they only had one size. GMP used a fair amount of Hirobo parts in their helicopters. You could also use the later style black fan but would have to re install your engines stock prop drive washer.
Sep 17, 2019, 01:25 PM
Trader Rating: 6
Registered User
Thread OP
V22Chap has one on the way for me. That's the reason that I asked for a GMP part knowing that it was made by Hirobo which is what I wanted to start with.


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold All aluminum GMP RC-10GT project, almost all parts to finish Sleepy111 Cars - Trucks and Parts (FS/W) 4 Apr 27, 2019 09:13 PM
Sold Vintage GMP Parts imodel Aircraft - Fuel - Helis (FS/W) 1 Nov 26, 2017 11:52 AM
Wanted GMP LEGEND parts RWR HARPIN Aircraft - Fuel - Helis (FS/W) 2 Sep 11, 2017 04:38 PM
Sold GMP Cricket parts/manual exf3bguy Aircraft - Fuel - Helis (FS/W) 0 Nov 19, 2016 04:16 PM
@@GMP Competitor Pro parts [email protected]@ hooleydog Fuel Heli Talk 0 Sep 11, 2005 05:59 PM