Thread Tools
Aug 31, 2019, 09:30 PM
rc user
pdooley's Avatar
Thread OP
New Product

Omphobby m2


anybody seen this?
400mm rotor disk, so, maybe 175-180mm main blade?
but it sounds like a much larger heli in the video.

https://ohiomodelplanes.com/collecti...17113152028715

https://www.youtube.com/watch?time_c...&v=K67XpXq33H4

found a thread in the micro section, it's been out, or in the works for a while now.
https://www.rcgroups.com/forums/show...ep-updating%29
Sign up now
to remove ads between posts
Sep 01, 2019, 12:23 AM
Registered User
Atomic Skull's Avatar
Quote:
Originally Posted by pdooley
anybody seen this?
400mm rotor disk, so, maybe 175-180mm main blade?
but it sounds like a much larger heli in the video.

https://ohiomodelplanes.com/collecti...17113152028715

https://www.youtube.com/watch?time_c...&v=K67XpXq33H4

found a thread in the micro section, it's been out, or in the works for a while now.
https://www.rcgroups.com/forums/show...ep-updating%29
It looks about the same size as an Oxy2. I'd love to see an all plastic or mostly plastic version of this.
Sep 01, 2019, 03:19 AM
Teleport User
Vaygre's Avatar
I saw that from RCG ads. - youtube...good looking heli. Anyways uhmm...why use two motor instead of one. Would be cool if they have belt or direct gear version, let's say they have wide option we can install for the kit, motor and electronics. Happy to see another brand come jump in into heli
Sep 01, 2019, 01:17 PM
Registered User
I have been following it for a while, link here https://www.rcgroups.com/forums/show...ep-updating%29

it seems to be a really capable micro, and i like the look of it!
Sep 01, 2019, 04:15 PM
Registered User
Atomic Skull's Avatar
Quote:
Originally Posted by Vaygre
I saw that from RCG ads. - youtube...good looking heli. Anyways uhmm...why use two motor instead of one. Would be cool if they have belt or direct gear version, let's say they have wide option we can install for the kit, motor and electronics. Happy to see another brand come jump in into heli
Is it a motor driven variable pitch tail or just a regular motor driven tail?
Sep 01, 2019, 05:22 PM
Teleport User
Vaygre's Avatar
Quote:
Originally Posted by Atomic Skull
Is it a motor driven variable pitch tail or just a regular motor driven tail?
I'm not sure, it look like a regular motor driven tail maybe
Sep 01, 2019, 07:12 PM
rc user
pdooley's Avatar
Thread OP
it looks capable of doing more 3D than me.

if it is direct drive main and tail, then that's pretty cool. very different and with that tail authority, a viable option to belt and shaft drive.
Sep 02, 2019, 02:42 AM
Registered User
Atomic Skull's Avatar
Quote:
Originally Posted by pdooley
it looks capable of doing more 3D than me.

if it is direct drive main and tail, then that's pretty cool. very different and with that tail authority, a viable option to belt and shaft drive.
Motor driven tail:

Minicopter Joker 3DD (6 min 12 sec)
Sep 04, 2019, 03:18 AM
Registered User
Quote:
Originally Posted by Vaygre
I saw that from RCG ads. - youtube...good looking heli. Anyways uhmm...why use two motor instead of one. Would be cool if they have belt or direct gear version, let's say they have wide option we can install for the kit, motor and electronics. Happy to see another brand come jump in into heli
Hi, now our M2 come with BNF version, actually the heli built in ESC, flybarless control system and receiver, You don't need to go through complicated settings, if you purchase M2 with our T6 transmitter, that's the RTF version.
We will launch the M2 PRO version next year.
Meeting the needs of higher professional customers,the M2 PRO come with power system only, you can setup the servo, gyro, ESC, and others accessories you liked by yourself.
Sep 04, 2019, 03:33 AM
Registered User
Quote:
Originally Posted by Atomic Skull
Is it a motor driven variable pitch tail or just a regular motor driven tail?
It's regular brushless motor via change the RPM to driven tail. Due to the direct drive of the main motor, our rotor head processing precision is very high, the body vibration is small, this is very helpful for the gyroscope lock tail, with our algorithm debugging, The pilot got very good feedback, more than their expected. pls visit our YOUTUBE channel see the heli test videos: https://www.youtube.com/channel/UCYD..._as=subscriber

OMPHOBBY M2 3D Heli Flying VIDEO 3 (2 min 40 sec)
Last edited by Sunnysky; Sep 04, 2019 at 04:27 AM.
Sep 04, 2019, 03:39 AM
Registered User
Quote:
Originally Posted by Vaygre
I'm not sure, it look like a regular motor driven tail maybe
Yes, it's regular motor driven tail
Sep 04, 2019, 04:13 AM
Registered User
Hello everyone, order now get M2 BNF price $249 with free shipping, Special offer is valid until 30 September,2019.
The current expected shipping date is 20 September, 2019.
Purchase link: https://ohiomodelplanes.com/collecti...17110424715307

OMPHOBBY M2 3D heli fly VIDEO 4 (2 min 55 sec)
Last edited by Sunnysky; Sep 04, 2019 at 04:26 AM.
Sep 05, 2019, 04:35 AM
Registered User
@Sunnysky

can i know the battery dimension? wondering 3s 850 from oxy2 can fit.
Sep 05, 2019, 09:15 AM
Registered User
Steve_'s Avatar
Quote:
Originally Posted by Atomic Skull
And another. Skip to 1:19 for the money shot. https://youtu.be/-tJVvrXU9MA?t=79

Blue Thunder RC Helikopter 700 3-Blatt Rundflug 1 (4 min 58 sec)


A servo driven actuated direct drive variable pitch tail would eliminate the barking chipmunk sound, something that likely
only bothers myself, since I never hear anyone else complain about it.
Last edited by Steve_; Sep 06, 2019 at 09:09 AM.
Sep 07, 2019, 12:39 PM
Genius man
denis747's Avatar
Quote:
Originally Posted by Steve_
And another. Skip to 1:19 for the money shot. https://youtu.be/-tJVvrXU9MA?t=79

https://www.youtube.com/watch?v=-tJVvrXU9MA

A servo driven actuated direct drive variable pitch tail would eliminate the barking chipmunk sound, something that likely
only bothers myself, since I never hear anyone else complain about it.
Imagine crashing that turbine heli, I would be stressed and depressed


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product OMPHOBBY T720 4Ch Trainer RC Airplane EPP with Gyro 716mm Wingspan - RTF tymodel Parkflyers 2 Today 12:55 AM
News Diatone M2 and M2.5 Frames Coming Soon Jason Cole Micro Multirotor Drones 1 May 21, 2018 12:43 AM
New Product Freeworld FPV720 7" 32CH 5.8G 1024x600 600cm/m2 FPV monitor w/ diversity SeByDocKy FPV Equipment 9 Dec 05, 2016 12:42 PM
Discussion M2.6 vs M2.5 threads archiebald Fuel Heli Talk 1 Sep 16, 2013 06:59 PM
Discussion where to get small hardware; m2, m2.5 ? cmulder Electric Heli Talk 19 Jul 11, 2007 06:26 PM