Thread Tools
This thread is privately moderated by GroundControlRC, who may elect to delete unwanted replies.
Aug 31, 2019, 07:11 PM
Registered User
Thread OP
Video

DustOff #6 - Glue & Fly Series F22 Micro V2 - My 100th Flight ;-)




Here is a link to the Video:
https://www.youtube.com/watch?v=6WwbbWcjrmA

Yep! 100 Flights on this Micro Parkjet!
Another milestone for this fun little Parkjet ;-)

Finally some calmer wind to fly in ;-)
Wind this morning was only 3-5mph, Yeah!

The skill level needed for this Micro Parkjet is Intermediate to Advanced.
Intermediate setup is a 2S Power System with 10 points more Dual-Rate than on a 3S Setup.
Advanced setup is a 3S Power System.
It's very docile on a 2S Power System, Fast & Acrobatic with a 3S Power System.

The "Glue & Fly Series" F22 Micro V1 Plans are available for Patrons & Subscribers!
To get a copy of the Plans send and email to [email protected]
In the Subject enter: "Glue & Fly Series" F-22 Micro V1 Plans
I will send them to you via email as soon as I can.

Here are links to the components:

Racerstar Racing Edition BR1407 3500KV 2-3S Brushless Motor
https://www.banggood.com/Racerstar-R...47791920140372

Emax ES9251Ⅱ Upgrade Version 2.5g Plastic Micro Digital Servo
https://www.banggood.com/Emax-ES9251...47791920140372

TURNIGY Plush 10amp Speed Controller w/BEC
https://hobbyking.com/en_us/turnigy-...asc=7704831703

GemFan Bull Nose 3545 GRP/Nylon Propellers CW/CCW Set Green (2 pairs)
https://hobbyking.com/en_us/gemfan-b...asc=4386980317

Turnigy nano-tech 460mah 2S 25~40C Lipo
https://hobbyking.com/en_us/turnigy-...asc=4415089965

Turnigy nano-tech 450mAh 3S 65C Lipo (E-flite Compatible Blade 180CFX EFLB4503SJ30)
https://hobbyking.com/en_us/turnigy-..._asc=251133636

OrangeRx R610V2 Lite DSM2 Compatible 6CH 2.4GHz Receiver w/CPPM (Version 2)
https://hobbyking.com/en_us/orangerx...asc=5700704759


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools