Thread Tools
This thread is privately moderated by JeffMac, who may elect to delete unwanted replies.
Aug 26, 2019, 07:00 PM
I'd rather be flying.....
JeffMac's Avatar
Thread OP

1965/6 Colt 35 build - as electric RC 3 channel

All -

I finished building the 66" Colt 35 under Sundancer George's Complete A Project ( CAP) 2018.

It got to fly it this summer quite a few times , so far... It just could not be a better flyer.

If anyone cares to build it - DO NOT USE THE FRONT WING MOUNT DOWEL LOCATION shown on the plan - change it to a typical dowel like i did, or your favorite system.... That was a mod after flying and having the wing shift.

A link to the build log is posted below rather than repeat it all...

The ready to fly weight is just under 5 pounds... Polyspan and Polyspan lite were used for covering, Nelson clear and blue Water based polyurethane and yellow tamiya acrylic paint was used.

The videos are short, shot by me during flight .....


Last edited by JeffMac; Dec 05, 2019 at 10:19 PM. Reason: addtl
Sign up now
to remove ads between posts
Aug 27, 2019, 09:44 AM
Registered User
Pierre_de’ Loop's Avatar
Beautiful work. thanks for posting that article too!
Aug 27, 2019, 10:51 PM
I'd rather be flying.....
JeffMac's Avatar
Thread OP
Thank you, Pierre....

Best regards,


Quick Reply
Thread Tools