350 NiMH & GWS full fuselage Cub - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Apr 29, 2001, 09:50 AM
Registered User

350 NiMH & GWS full fuselage Cub

Does anybody have a 7-cell 350 NiMH they could measure for me? I bought the new full fuselage GWS Pico Cub yesterday, and I'm wanting to use 350 NiMH, instead of 270 NiCd, for juice. The fuselage has a narrow battery bay on the bottom, and I want to make sure the pack will fit before I shell out the $$$. The model came with what I guess is the standard GWS motor - I have no experience with GWS stuff so far. The instructions say don't use more than 6 cells, but because of the lower voltage, I'm guessing a 7 cell NiMH should be ok.

Tony Turley
Sign up now
to remove ads between posts
Apr 29, 2001, 08:59 PM
Registered User
i have the full fuse lite stik, and a 7 or 8 cell pack wont fit stock, but cut off one side of the battery "bay", and the foam under it, and it will fit fine...the cg change is hardly any, so i wouldnt worry about any flying problems
Apr 30, 2001, 06:56 AM
Registered User