Thinking about building a fusion 270,

Hard to pass on that 270ARF price.


Which electronics will i need,

Which servo set?

Which fbl ??

Help is appreciated

https://www.rcgroups.com/forums/show...BNF-Helicopter

That's a good thread to read and ask any questions that arise for sure, everyone has their favorites, both servos and FBL. I bought mine BNF, rebuilt the H3050 cyclic servos twice, then put KST 215's on it and have twice as many flights on it with no issues. it's hard to beat the H3060 on the tail, they are fast and have great longevity. for what the AR636A does, it's selling at a good price, but with the factory settings expect a head shake at high rpm's and tip-overs until it's tuned. pretty much any heli FBL gyro will work, all need tuned. refer to the thread

When you say tune?

What will i need to change? What setting?

Originally Posted by Wayne Moyer

That's a good thread to read and ask any questions that arise for sure, everyone has their favorites, both servos and FBL. I bought mine BNF, rebuilt the H3050 cyclic servos twice, then put KST 215's on it and have twice as many flights on it with no issues. it's hard to beat the H3060 on the tail, they are fast and have great longevity. for what the AR636A does, it's selling at a good price, but with the factory settings expect a head shake at high rpm's and tip-overs until it's tuned. pretty much any heli FBL gyro will work, all need tuned. refer to the thread

Any fbl out there will need to be adjusted. Mine was bind and fly and still needed cyclic d decreased. It's not a one size fits all, but that is most common with the AR636A. Others have used other FBL with good results. Best to read the Fusion 270 thread.

Originally Posted by alibaloch94

Thinking about building a fusion 270,

Hard to pass on that 270ARF price.


Which electronics will i need,

Which servo set?

Which fbl ??

Help is appreciated

I can offer you a good deal on a 270 that is ready to fly if you're interested.