Naro Reciever glitching badly in Tantrum
I've just built a Tantrum and took it out for it's maiden flight at the weekend, unfortunatly found that I had a lot of glitching (more than a couple of seconds of glitching) from the newly bought GWS Naro Rx, nearly ended in disaster a few times! But not quite
The Rx is in the position described in the manual, velcroed to to one side of the fuselage but there are a lot of servo wires and esc wires quite close to it. There's not a lot of room for all the wires etc but I could put some foam in to seperate if any of the wires could be causing interference.
The setup is:
GWS ICS400 Esc
GWS Naro Rx
8 cell Kan 1050
Hitech hs55 servos (except one Naro servo)
Anybody have any idea as to whether it is a faulty Rx or if it is getting some interference from something?
Thanks for any help.
Last edited by tvuk2000; Feb 07, 2005 at 06:05 AM.
Poke around the GWS forum. I'm having the same problem with 2 GWS receivers (original and a replacement). I just got the RMA form from GWS support this morning - we'll see if third time's a charm.
Needless to say, I've purchased an alternative (Hitec 555) and don't intend to buy any more GWS R6's.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|What's really in a Tantrum????||genovia||Parkflyers||18||Oct 15, 2003 12:46 PM|
|FS NIB 4-Ch. GWS Naro Reciever (JR)||AirVenture||Aircraft - Electric - Airplanes (FS/W)||5||May 15, 2003 07:20 PM|
|One R4P GWS Reciever Glitching and another Not||Manchild||Electric Plane Talk||4||Oct 12, 2002 11:19 AM|
|My reciever is glitching!!!!!! help||JStory||Electric Plane Talk||1||Jan 08, 2002 01:38 AM|
|reciever glitching- please help!||flybike||Power Systems||9||Nov 25, 2001 03:38 PM|