Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Jan 29, 2005, 06:00 PM
scaulfi is offline
Find More Posts by scaulfi
Big thrills w/o hospital bills
scaulfi's Avatar
Quote:
Originally Posted by swheels
Thanks guys Motor is a picco .15 It will pull a wheelie only on ruff terrain and stay on the throttle....HAHAHA......As far as breaks i was going to make some front breaks.......after breaking the body,front fender, ricky's head and the back shock went all pogo stick on me, you know (BOING!!BOING!!BOING)I put that cable in the front and RICKY C in the closet.
shweels,.. RickyC looks cool with a Nitro motor in his bike!.. So, has the gyro in the rear wheel taken much punishment at all?, or did you rip it out?..

Also, as for broken fenders etc,.. try making your own out of old Laundry liquid bottles, you could cut a rear guard from the handle part of a bottle, but you'll need to find a bottle with a handle that suits the replaced guard..! You could allmost make the whole body set, bar the tank!,.. all those different colored/shaped bottles out there, you could turn the bike into a green Kawazaki, white Yamaha, yellow Suzuki, etc, etc...

Shaun
Sign up now
to remove ads between posts
Old Jan 29, 2005, 06:48 PM
swheels is offline
Find More Posts by swheels
Registered User
swheels's Avatar
thanks shaun First i tried without the gyro.....Started off nice and slow,cool.....Gave it some gas it went like a bucking bronco over the bumps and fell down. So i put the gyro back in,much better.After breaking all the parts as i said earlier.ricky c was retired at an early age....
Old Jan 30, 2005, 02:02 AM
wholeshot is offline
Find More Posts by wholeshot
Registered User
you have to get some video
Old Jan 30, 2005, 04:57 AM
wicked_n_raw is offline
Find More Posts by wicked_n_raw
The Raw 1
wicked_n_raw's Avatar
Wow Swheels,

Now I have to rethink about buying a Ricky C bike.
Old Apr 07, 2005, 12:02 PM
wholeshot is offline
Find More Posts by wholeshot
Registered User
How's your nitro project going?
Old Apr 07, 2005, 01:14 PM
SUMO13 is offline
Find More Posts by SUMO13
Registered User
SUMO13's Avatar
Hi Guys,
iīm still working on that Conversion... i knew there will be some others quicker than me...

want some pics ???
Old Apr 07, 2005, 01:19 PM
wholeshot is offline
Find More Posts by wholeshot
Registered User
Please
Old Apr 07, 2005, 07:19 PM
dmincin is offline
Find More Posts by dmincin
dammachines
Quote:
Originally Posted by SUMO13
Hi Guys,
iīm still working on that Conversion... i knew there will be some others quicker than me...

want some pics ???

Just wondering, have you come up with a way to brake yet?
RCG Plus Member
Old Apr 08, 2005, 03:49 AM
sumo is offline
Find More Posts by sumo
Registered User
does any one remember the early traxxas nitro trucks? they used an arm against the clutch bell as a brake---its not hi tech but it did work especially if you bonded some heli clutch lining to the arm.
i think the biggest problem is going to be keeping the gyro in one bit!!!
Old Apr 08, 2005, 05:45 AM
SUMO13 is offline
Find More Posts by SUMO13
Registered User
SUMO13's Avatar
Iīm trying to find somebody to mill me an alloy front rim at the moment.

with this one should be able to mount a brake sys like pats !

pics later
Old Apr 08, 2005, 06:12 AM
metomwhou is offline
Find More Posts by metomwhou
Registered User
metomwhou's Avatar
Quote:
Originally Posted by sumo
does any one remember the early traxxas nitro trucks? they used an arm against the clutch bell as a brake---its not hi tech but it did work especially if you bonded some heli clutch lining to the arm.
i think the biggest problem is going to be keeping the gyro in one bit!!!
I think that the NF bike still comes with that type of set-up.
You're right about needing to put something on the arm, I remember crashing into to just about every corner barrier after about the second tank of fuel. The clutch bell would get so hot and the arm actually started deforming a little bit. I think we ended up scuffing the bell and arm with a dremel but that wouldn't last very long and it would be smooth again. I never thought about or knew about the clutch lining stuff.
Tom
Old Apr 08, 2005, 06:23 AM
dan duesentrieb is offline
Find More Posts by dan duesentrieb
Registered User
dan duesentrieb's Avatar
hi Sumo13,
the idea with the break on the clutch bell is very good, i would try this first.
I remember the strap break (bandbremse) on my old land jump buggy was quite effective, you just have to pay attention to the rotational direction of the clutch bell: depending on how you fix the strap the break is self-amplifying or not.
i will post a picture of that break later.
anyways i concern a rear brake as more usefull on rc dirtbikes than front brakes...
...but i couldnīt resist either mounting a cool looking (wave-design) brake on that bike

dan

p.s. sorry for all the dirt on the picture, havenīt cleaned that buggy after the last run.
Last edited by dan duesentrieb; Apr 09, 2005 at 07:33 AM. Reason: picture added
Old Apr 08, 2005, 07:54 AM
SUMO13 is offline
Find More Posts by SUMO13
Registered User
SUMO13's Avatar
iīm still in constuction-mode
Old Apr 08, 2005, 04:30 PM
hoverboy is offline
Find More Posts by hoverboy
Anything RC
hoverboy's Avatar
Wow !!!!using nitro ........i want to do that!!! excellent job.... lookes so clean.

What about the spider slip gear..ect...... in the gyro...is it going to melt......im really woried...... about the (gyro)........????
Old Apr 08, 2005, 09:09 PM
katana2665 is offline
Find More Posts by katana2665
Registered User
katana2665's Avatar
Edwin, Haven' seen you in the Hobby cnter for awhile...When are you coming in? We running this summer?

chris


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Yippee! Ricky Carmichael dirt bike CNR parts! signats Motorcycles 62 Aug 28, 2009 07:31 PM
Parts for the Ricky Carmichael Bike - Finally... dmincin Motorcycles 88 Nov 26, 2005 10:07 PM
[pictures] Ricky Carmichael, BMX track, jumps, dirt, french mag tom4 Motorcycles 20 Nov 28, 2004 01:43 PM
Ricky Carmichael dirt bike for sale.... reptileman Motorcycles 4 Nov 19, 2004 09:13 AM
Nitro Dirt Bike...Do they exist???? FireFlyer Motorcycles 15 May 17, 2004 07:20 PM