Thread Tools
This thread is privately moderated by GroundControlRC, who may elect to delete unwanted replies.
Mar 27, 2019, 09:48 AM
Registered User
Thread OP
Video

Glue & Fly Series - F-22 Mini V3(B) - Flight 35! What a Blast!


Glue & Fly Series - F-22 Mini V3(B) - Flight 35! What a Blast!



Here is a link to the Video:
https://www.youtube.com/watch?v=ZBoXg-R1niE

I have this Parkjet all trimmed out and have the CG well balanced ;-)
The plane tracks extremely well and stays where you put it.
The Nose stays nice and level with abrupt Full Throttle at level flight ;-)
I measured the CG after getting back from the Flight Session and it is located 45mm forward of the front of the Prop Slot, or 11mm back from the top of the cutout on the KF2 for the Servos.
That's approx. 10mm further back than when I performed the Maiden as it felt a tiny bit nose heavy.
I have found that it takes time getting used to a completely neutral balance on the CG.


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools