Thread Tools
This thread is privately moderated by GroundControlRC, who may elect to delete unwanted replies.
Mar 23, 2019, 03:48 PM
Registered User
Thread OP
Video

Project - "Glue & Fly Series" Nano Backyard/Indoor Plane Status #1


Project - "Glue & Fly Series" Nano Backyard/Indoor Plane Status #1



Here is a link to the Video:
https://www.youtube.com/watch?v=l2Uc4sxtJyg

OK, I decided to take on this side project as I have wanted an Nano/Micro Backyard/Indoor Plane for quite some time and I wanted to be sure it could carry a Micro FPV System so I decided to try and design one myself ;-)

This is Ground Zero, my Prototype of what I envision for this Plane.
It's much smaller that I had in mind so I think some upward scaling will be in order ;-)
I have already build this Airfram 90% so I'm going to complete this build and perform the Maiden Launch as a learning process.
I stated "Maiden Launch" and not "Maiden Flight" because I do not expect this Prototype to actually fly or at least not fly well.
Stay tuned as I work my way to, hopefully, designing, building, and flying a well behaved Nano Backyard/Indoor Plane ;-)


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/
Sign up now
to remove ads between posts
Mar 26, 2019, 09:28 PM
Registered User
I am looking forward to the maiden. You don't realize how tiny the air frame is until your hand comes into the picture!
Mar 26, 2019, 10:11 PM
Registered User
Thread OP
Thank you much!
Yeah, I scaled it down way too much!
I should have left it at my original scale which was a 12" wingspan ;-)
I should have the Maiden Launch completed by next week ;-)
See you in the Air!


Quick Reply
Message:
Thread Tools