Thread Tools
This thread is privately moderated by GroundControlRC, who may elect to delete unwanted replies.
Mar 20, 2019, 08:46 AM
Registered User
Thread OP
Video

Test - Results of Brushed & Brushless Motor & Prop Testing on 1S LIPO


Test - Results of Brushed & Brushless Motor & Prop Testing on 1S LIPO



Here is a link to the Video:
https://www.youtube.com/watch?v=Jh-Esp8WFtA

Well, it is as I feared not as I had hoped.
The best candidate for a 1S LIPO setup is a Brushed Motor & Prop.
I have the Airframe Design approx. 75% complete.
Now that I have the power system picked out it's time to complete the Airframe.
Stay tuned for updates on this side project of mine to develop a nice flying Backyard/Indoor Nano Plane.

Here is a link to the Brushed Motor and Prop that won the thrust contest:

1.2mm Propeller and 1020 Coreless Motor Set for 90mm-150mm DIY Micro FPV RC Quadcopter Frame
https://www.banggood.com/1_2mm-Prope...47791920140372


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Moving to Lipo on brushed motor rcdevil666 Electric Power Cars 7 Feb 25, 2016 01:09 PM
Question Testing 4mm brushed motor: can I just plug it into a 1S lipo? Do I need a prop? zovirl Scratchbuilt Indoor and Micro Models 2 Feb 20, 2016 05:58 PM
Question What is the Amp draw of 180 brushed motor DD with 5030 prop running on 2 cell lipo? hklam Power Systems 0 Mar 01, 2007 02:13 AM
M-20 and N-20 Motor/Gearbox/Prop Test Results cybermike Scratchbuilt Indoor and Micro Models 27 Jul 30, 2003 11:03 AM