Thread Tools
This thread is privately moderated by old4570, who may elect to delete unwanted replies.
Feb 19, 2019, 01:52 AM
Registered User
old4570's Avatar
Thread OP
Discussion

More Elf .... ( Some servos got here )


Some servos were in the letter box today ..

So it was time to move a little further forward with the elf .
I used double sided tape to work out where I could place the servos .
Then I had to try and squeeze in the 4ch FS2A Rx from banggood .

I soldered the servo pins to the Rx and then bound it to my Q x7 .
Then I had to solder up a battery extension ...

CG looks ok .. with the lay out pictured ...
Rx is bound , servos are working , and everything looks to fit under the hood ! ( Canopy in place )

I have not done the control rods as yet ( servo connections ) , I think I have done enough for today ..
On the morrow I should hopefully have the Elf up and running ..
Sharp eyes may pick up the change from metal wing screws to nylon ( Since I had them )

Moving forward !
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Any Flat Earthers Here? I know we've got some YEC's here.... Deadstick 8409 Life, The Universe, and Politics 566 Sep 13, 2017 11:21 AM
Discussion New guy here got some questions for you all - Thanks matt4x4 Rock Crawlers 2 Apr 04, 2017 10:20 AM
Discussion Shock horror I got some more hobby grade stuff! nowinaminute Off-road Cars 0 Nov 06, 2016 04:52 PM
Discussion Here's some pics of my "Stuff" - More to come. RunAway15 Beginner Multirotor Drones 12 Feb 18, 2016 10:40 AM
Discussion Ok....I got my OS 46FX torn down this far, but got stumped here ; G.F. Beurling Engines 61 Nov 11, 2015 11:07 AM