Thread Tools |
This thread is privately moderated by scousethief, who may elect to delete unwanted replies. |
|
|||
|
Cool
Durafly™ Excalibur High Performance 1600mm (63") V-Tail Glider (PNF)
https://hobbyking.com/en_us/excalibur-pnf.html
Video courtesy of the very famous Captainz Petrincic and Blaz and a link to their very funny Youtube channel. Please use their links so that any revenue via ads is directed towards the pilots https://www.youtube.com/user/petrincic1/videos Forged for a King in a distant realm, the legendary Excalibur is here. The most anticipated Durafly release this year, The Excalibur must be flown to be truly appreciated. Innovative design features, such as the cantilever forward swept wing, V-tail tail surfaces, incredibly strong construction and stunning lines. Just like the legendary sword, Excaliburs strength is paramount. The engineers at Durafly were given their hardest challenge yet, to design a wing that is ultra thin but incredibly strong in EPO foam! The wing has carefully positioned carbon fiber reinforcement and pre-tensioned glass fiber strips. The fuselage is feature packed with a square carbon fiber tube and glass fiber strips. The V-tail along with control surfaces are reinforced. All these features combine to make the Excalibur a weapon. Servos are all pre-installed with a whopping 3542 800kv Aerostar brushless outrunner motor up front. 60amp Aerostar brushless speed controller. Two piece removable wing makes assembly fast with wire-free PCB connection between the wing and fuse. Rule the sky with the Excalibur. Features: • Highly compressed EPO foam construction • Available in both PnF and Kit variants • Nose cone supplied for slope soaring • Reinforced with carbon fiber and glass fiber • Extreme speed, Awesome maneuverability • Bolt together plug and play design • Unique forward sweep wing design • V-tail tailplane • Aerostar 3542 800kv brushless outrunner • Aerostar 60amp brushless ESC • Folding 13x7 Aerostar carbon fiber propeller • Quality Servos • PCB servo wing connector • Stunning looks • Intake cooling features • Ready to fly in minutes Specs: Wingspan: 1600mm (63") Length: 1010mm Flying weight: 1250g Controls: 4 Channel (Ailerons, Elevator, Rudder (V-Tail), Throttle) ESC: Aerostar 60amp brushless ESC Motor: 3542-800kv brushless outrunner Propeller: Aerostar folding carbon fiber 13x7 Required: Minimum 4ch Transmitter capable of V-Tail mixing Appropriate 4ch receiver 1 x 1800~2200mAh 4S LiPoly high "C" rated battery Included: 1 x Durafly Excalibur The manual is not included in the box but downloaded from the files tab or here |
||
|
|||
|
|
Thread Tools | |
Similar Threads | |||||
Category | Thread | Thread Starter | Forum | Replies | Last Post |
Video | Durafly Bonanza 950mm (37.4") (V-tail) PNF Maiden flight & good tips | robertmax | Scale ARF/RTF | 1 | Feb 02, 2022 12:17 PM |
News | Durafly Bonanza 950mm (37.4") (V-tail) PNF | Jim T. | Electric Plane Talk | 16 | May 24, 2019 10:54 AM |
Discussion | Durafly Dynamic-S Performance V-Tail Glider | MadridFlyer | Parkflyers | 3 | Jan 27, 2013 08:46 PM |