Manual for Align Head Lock gyro ??? - RC Groups
Thread Tools
Jan 16, 2005, 06:25 AM
Registered User

Manual for Align Head Lock gyro ???


I bought a Align Head Hold gyro for my H2, but there was only a manual in chinese
Canīt find one in english on there web site and since this is my first HH gyro i have troubel setting it up.
Does sombody know where i can download a manual ??


- Boom
Sign up now
to remove ads between posts
Jan 16, 2005, 06:34 AM
Registered User
Just found it ..
Sorry just had to lock the right place :-)

- Boom
Jan 16, 2005, 08:01 AM
Seawolf 24's Avatar
If it's anything like the telebee, manual, do what I did and download the Futaba 401 manual; it's full of good generic info re: HH gyros. Of course, some of the info is specific to the Futaba, like mounting, pots, etc. But operation info is the same.

Jan 16, 2005, 02:54 PM
Registered User
Now i have been reading the Align manual and the futaba 401..
But my gyro is still not acting the way it has to.
I use a Hs50 servo on the tail and the Align HH gyro, have a futaba FF7.
Before i used a GWS Pize gyro.
So here is what i did.

- Turned of the Revo
- Set the End points to 50%
- Set all trims to 0
- In the FF7 menu i set the gyro to A:30% and N:50%
- The gain on the gyro is at 50%

But as soon as the heli lifts of it starts to wag like crazy and even when i start the tail drifts ...

What am i doing wrong ????????

need help


- Boom
Jan 16, 2005, 03:13 PM
Registered User
I can't get all of the drift out of my Telebee gyro. But the drift is pretty small. Maybe 1 degree every couple seconds. The best way to eliminate drift is to get rid of all vibration possible and make sure the gyro is mounted properly.

To reduce drift you have to use sub-trim for the rudder channel. My gyro like around 70% and 15-20 sub-trim. The amount of sub-trim needed seems to be temperature dependant. I 40 degree temps (outside) it likes around 0 sub-trim and 70 degree temps (inside) it likes 15-20.
Jan 16, 2005, 08:27 PM
Registered User
You can find a guide to setting up the Align gyro linked directly off the trextuning home page.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Align Head Lock Gyro RCE-500 $60.00 shipped gbagley Aircraft - Electric - Helis (FS/W) 0 Mar 18, 2006 04:27 PM
settings for K10255TA Head lock Gyro RCE-500 noordin67 Electric Heli Talk 2 Sep 03, 2005 05:19 AM
Off Site ALIGN Head Lock Gyro RCE-500 ( Brand New) KidNovak Aircraft - Electric - Helis (FS/W) 0 Aug 06, 2005 09:07 AM
Yippee! How to set the Align head lock GYRO in JR fung Mini Helis 0 Jan 12, 2005 05:46 AM
Align Head lock Gyro RCE-400 e_lm_70 Electric Heli Talk 0 Jan 08, 2005 07:17 AM