|
||
|
Quote:
|
|
|
||
|
|
||
|
Quote:
The set up jig will continiously. But I must make her very nice as perfect as possible, otherwise some peoples will have another reason to attack me again! |
|
|
||
|
||
|
Quote:
EM150 version can fly with 1050mAh for 10~12 minites, very light weight. Or 1300mAh for 13~15 minites. |
|
|
||
|
|
|
Bring your PHA-01 and GWS Dragonfly to GWS booth, if you have any problems?
Welcome to 2005 RCX show to see GWS booth.
Steve and me arrival late last night. Jeff Hunter ( Jarhead ) is here in GWS USA office. GWS staffs are busy for set up booth... You are welcome to visit GWS booth, bring your PHA-01 and GWS Dragonfly, if you have any problems? We would be more than happy to help you. |
|
|
|
|
|
PHA300 at RCX show performed by Jarhead and Steve Lo.
As above.
The happy family with GWS Dragonfly! Jarhead set up jig. |
|
|
|
|
|
How are you guys attaching your servos to the frame? I was using double sided tape that came with the kit... but after my last rebuild i noticed the servos would wiggle ALOT.
I then tried some hot glue... One of the servos popped off while i was doing some 'trimming' flights . So... Whats the recommended way to secure those servos? ~Brian |
|
|
|
|
|
End of May 2005, GWS will finish first lot of PHA-300 production!
End of May 2005, GWS will finish first lot of PHA-300 production!
http://www.gws.com.tw/english/news/20050425.htm I kept flying so many times GWS Dragonfly EM150 and EM300H with PHA-01or PHA-300. So far I can't find the problems like I had read the posts here. But I will continiously try to find out what going on? |
|
Last edited by GWS4CEO; May 27, 2005 at 07:55 PM.
|
|
||
Thread OP
|
Nice questionQuote:
|
|
|
||
|
|
|
Here is the tip of the day for mounting GWS servos or any servo to the Dragonfly helicopter frame.
Cut a piece of strapping tape out so you can wrap it all the way around the base of the servo and make the seam on the outerside. Now stick the a piece of Scotch-Double sidded foam tape or the GWS tape that is in the kit on the the side of the servo, tape sticks better to tape then it does the servo then press in place on the frame of the dragonfly. Will hold rock sold also make cleaning tape of your servo later alot better just remove the packing tape! I getting ready to add a tips and tricks section to my website and this will be one of them for sure. www.electricmicro.com Robert |
|
|
|
|
|
I use contact cement (eg Shoogoo or similar) because when it lets go, it does so partially, so handling gets a bit squirelly, but you don't lose control, and you can then redo it. Lots of people suggest that there is too much flx in double-sided tape, whereas contact cement holds the servo really tightly.
|
|
|
|
|
|
How to upgrade your PHA-01:
How to upgrade your PHA-01:
http://www.gws.com.tw/english/news/20050425.htm 1. Mail your PHA-01 (Still in good working condition, if your PHA-01 has been damaged, an additional re-condition & service fee may be applied.) 2. Download GWS User Data Form (from www.gws.com.tw). Print and mail together with your PHA-01 unit(s). 3. For each piece of PHA-01, pay US$35.00 difference for replacement of PHA-300 and handling. (Please download or contact GWS HQ* or GWS USA* for credit card authorization form.) *For Flyers in the USA, please contact and mail to GWS USA. GWS USA 138 South Brent Circle, City of Industry, CA 91789-3050 Richard@gws.com.tw Tel: 909-594-4979; Fax: 909-594-8051 For flyers outside the USA, please contact and mail to GWS HQ in Taiwan. Grand Wing Servo-Tech Co., Ltd. 153, SEC. 2, DATUNG RD. SHIJR CITY, TAIPEI 221, TAIWAN, R.O.C. service@gws.com.tw TEL : 886-2-86926255; FAX : 886-2-86926842 If you don't like to send CC info by web or e-mail, you may print: http://www.gws.com.tw/english/servic...m%20pha300.doc Fill this foam send by FAX to GWS USA or GWS Taiwan HQ. |
|
|
Thread Tools | |
Similar Threads | |||||
Category | Thread | Thread Starter | Forum | Replies | Last Post |
OC Heli Club | techcoast | Micro Helis | 2 | Feb 20, 2004 01:21 AM | |
E-Heli Club | FlyNHi | Electric Heli Talk | 0 | Sep 12, 2003 11:49 AM | |
Start a Heli club in NE Indiana | squirrel | Electric Heli Talk | 1 | Mar 14, 2002 07:28 PM |