Thread Tools
This thread is privately moderated by TinkleWid, who may elect to delete unwanted replies.
Jan 11, 2019, 03:13 PM
Registered User
TinkleWid's Avatar
Thread OP

Caddx Turtle v2 🐢 [4:3] FVP Flow Progression 🐢 Getting some Fresh Air

🐢 [4:3] FVP Flow Progression 🐢 Getting some Fresh Air

Note to self - Don't be lazy and try to re-arm after a big crash! Wanted to thrash 3" Props at altitude in 4:3 for the first time and what a rush !!! Lost a prop nut and prop in the process after thinking I had a lucky escape. Got my wings clipped :-) Anyway the Caddx Turtle V2 survived as well as the quad so all is good. Still loving flying in 4:3 rather than 16:9!

Caddx Turtle v2 🐢 [4:3] FVP Flow Progression 🐢 Getting some Fresh Air (3 min 41 sec)

Equipment Used:

Flying the Kwad Karl (Bando Racer 3) BR3 Frame with Caddx Turtle v2

XJB 145 build and motors

Caddx Turtle v2

VRD2 Pro Goggle rather than the TopSKy Prime 1S

Jumper T8SG

Gemfan 3052

I still think this footage is better than the output of the Runcam Split Mini 2 . It's not quite as good as as a Go Pro

Best firmware versions dated 7th September 2018

Caddx Turtle Settings: 1080p 60FPS
Wide FoV
7 saturation
1 Sharpness
5 Contrast
5 Brightness
EV -0.3
WDR on

Ensure you lower the sharpness to 0 or 1 unless using another lens

Caddx Turtle V2 is NOT ALWAYS SHIPPED WITH THE LATEST FIRMWARE 😱😱 The latest firmware is AMAZING 😱😱
(Note: How to repair a bricked Caddx Turtle with black screen)

How to repair a bricked Caddx Turtle from a firmware update

September Firmware - works with v2 and soon to be tested with v1 board

How to update Caddx Turtle firmware (step-by-step):

Caddx Turtle V2 latest Firmware Video Footage
Runcam KILLER 🐢 UPDATED Caddx Turtle v2 Latest Firmware AMAZING 🐢 RunCam Split Mini 2 FPV is DEAD (3 min 37 sec)

Wing Clipping Video Footage
Sign up now
to remove ads between posts

Quick Reply
Thread Tools