Thread Tools
Dec 21, 2018, 03:53 PM
Thread OP
Discussion

Official: Jeti DS-12 2.4GHz/900MHz Dual Band, Telemetry & Integration Radio System


With introduction of our brand new addition the Jeti DS-12 radio system to the ever expanding Jeti line of professional & hobby products. We would like to start new thread, fully dedicated to any questions, suggestions, software and hardware updates or any possible information anybody can have. As we are slowly transitioning to new mass market and hopefully we are able expand the number of customers who can experience what Jeti can offer, this thread will help us to keep all relevant information at one place.


Start new 2019 season with brand new Jeti DS-12 2.4GHz/900MHz Dual Band radio system. Dual band, dual redundant frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. With 12 channels, mini USB port, built-in speaker, headset jack, plastic transmitter gimbals with Hall sensors (4096 step resolution) and 4 ball bearings for precision movement, a large 320×240 color, backlight display and many other features the Jeti DS-12s are sure to become the new standard in transmitter performance.


We would like to introduce dedicated Jeti DS-12 website. Due to incredible interest and our limited resources we have decided to keep relevant information for the upcoming Jeti DS-12 web site separate in order to help with explanation of the new Jeti DS-12 radio system.

http://www.jetids12.com/



Introduction: Jeti DS-12 Radio System (1 min 37 sec)


Last edited by Esprit Model; Mar 24, 2019 at 12:00 PM.
Sign up now
to remove ads between posts
Dec 21, 2018, 03:54 PM
Thread OP
Held for Updates
Dec 21, 2018, 03:55 PM
Thread OP
Held for Updates #2
Dec 21, 2018, 03:56 PM
Thread OP
Brand New Jeti DS-12 only 718g/1.6 lbs.
Dec 21, 2018, 04:12 PM
Sagitta Fanboy
The hardware looks quite good, although sliders (rather than just knobs) would be preferred at this pricepoint.

Given your indications that there will be unlockable software options at extra cost, some detail on what functionality is present out of the box would be good.
Dec 21, 2018, 04:44 PM
Suspended Account
the weight is right. 100g more than a Taranis X7
Dec 21, 2018, 05:08 PM
Thread OP
Quote:
Originally Posted by mawz
The hardware looks quite good, although sliders (rather than just knobs) would be preferred at this pricepoint.

Given your indications that there will be unlockable software options at extra cost, some detail on what functionality is present out of the box would be good.
Some guys have plans to 3D printed custom levers, I am sure we will have few guy with machining capabilities coming on board.

Zb/Esprit
Last edited by Esprit Model; Dec 21, 2018 at 07:10 PM.
Dec 21, 2018, 06:13 PM
Registered User
Tell us about the most interesting feature of DS-12. Or, should I?
Dec 21, 2018, 06:43 PM
Sagitta Fanboy
Quote:
Originally Posted by Esprit Model
Some guys have plans to 3D print custom levers, I am sure will have few guy with machining capabilities coming on board.

Zb/Esprit
That should work reasonably well, especially for pinchers.

Now about that software....
Dec 21, 2018, 07:08 PM
Registered User
Zb, will these be ready for Toledo? If so get that red one ready!
Last edited by tobytorkn; Dec 21, 2018 at 07:15 PM.
Dec 22, 2018, 03:15 AM
Registered User
Radikal's Avatar
Quote:
Originally Posted by Esprit Model
Some guys have plans to 3D printed custom levers, I am sure we will have few guy with machining capabilities coming on board.

Zb/Esprit
WoW it's not been yet released and you want the end user to print 3D knob caps ??

Why don't you ask the manufacturer to rectify this defective design then ??

so you are telling us that you have no influence on Jeti's development. (your countryman) you are there just for importing boxes from europe.
Dec 22, 2018, 07:29 AM
Registered User
Zb will the bottom plates accommodate the harness mounts (two screws) on the ds12 like the other ds radios (for the shoulder harness arms)

Ps Vesele Vanoce!!!!
Dec 22, 2018, 09:27 AM
KD2PBU - Fly No Evil
davidbitton's Avatar
Quote:
Originally Posted by Esprit Model
guy with machining capabilities
will Jeti release a model of the enclosure?
Dec 22, 2018, 09:50 AM
Thread OP
Quote:
Originally Posted by tobytorkn
Zb will the bottom plates accommodate the harness mounts (two screws) on the ds12 like the other ds radios (for the shoulder harness arms)

Ps Vesele Vanoce!!!!
Yes full line of brackets, trays... is being prepared. Because there will not be DC/tray style of the DS-12 more attention is being paid to the accessories.

Zb/Esprit
Dec 22, 2018, 09:52 AM
Thread OP
Quote:
Originally Posted by davidbitton
will Jeti release a model of the enclosure?
Something that is being considered, we have few guys who are thinking about making silicone sleeves and handles.

Zb/Esprit


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Official: Jeti 12/14/16/24 2.4GHz/900MHz Radios, Telemetry & Device Integration Esprit Model Radios 42266 Today 02:10 PM
Discussion Video: Jeti 2.4GHz and 900MHz Dual Band Redundancy Link w/R3 & DC-24 Esprit Model Radios 0 Mar 24, 2017 12:49 PM
Discussion Jeti Duplex DS-14 2.4GHz Radio System!!! Esprit Model Jeti USA 27 Jul 10, 2016 11:35 AM
Discussion Official Info: Jeti 2.4GHz Duplex Radio & Telemetry Systems, Firmware Updates…. Esprit Model Jeti USA 9 Feb 18, 2013 02:32 AM