RJ-55 Regional Jet - RC Groups
Thread Tools
Dec 30, 2004, 02:54 PM
Registered User

RJ-55 Regional Jet

I am building a RJ-55 ROG Regional Jet kit from AirCadkits.com. Building with 3/32 balsa sticks sure is a pain - I wish they would make a ARF kit. But I have a question, The kit does not have a rudder. Has anyone of you guyes who have built one of these put on a rudder? I realize that when flying it's not necessary to have a rudder, but on landing with a cross wind a rudder would really come in handy. Thanks. Jack
Sign up now
to remove ads between posts
Dec 30, 2004, 08:34 PM
Flying Fatboy
Gordito Volador's Avatar

I think that talking to some of the really sharp electric guys who belong to the SSF club may be able to help. They fly at a field in Parrish and are a great bunch of guys and gals. If you need directions from Bradenton just e-mail me.

Regards, Bill
Dec 30, 2004, 09:58 PM
Registered User
Larry Dudeck's Avatar
The steerable nose wheel will take care of most cross wind problems. If the cross wind is too great to take off in, consider the difficulty you'll have about 5~7 minutes later.

But since you will have added the extra weight of the nose wheel servo, you might want to add a Sullivan type control cable and add the rudder.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold RJ-55 Regional Jet Kit Dan Halverson Aircraft - Electric - Airplanes (FS/W) 2 May 01, 2006 09:12 AM
AirCADkits RJ-55 JetTech Electric Ducted Fan Jet Talk 2 Oct 07, 2004 07:50 PM
FS-RJ-55 Handlaunch or ROG Kit! FANMAN Aircraft - Electric - Airplanes (FS/W) 16 Sep 18, 2004 11:34 AM
My RJ-75, aka Canadair Regional Jet! FANMAN Electric Ducted Fan Jet Talk 239 May 01, 2004 05:11 PM
VASA 55 Sized jet that can ROG ? Mmarshall Electric Ducted Fan Jet Talk 1 Jul 17, 2003 09:38 AM