Meanwell RSP-1000 Makeover - RC Groups

This thread is privately moderated by compass, who may elect to delete unwanted replies.

Nov 05, 2018, 11:14 PM #1
compass
compass Registered User Thread OP	Build Log Meanwell RSP-1000 Makeover Recently purchased a Meanwell RSP-1000 from Progressive RC a reputable vendor and a well known PSU brand for my icharger 406 DUO. But it seemed bare, incomplete, and 'naked'. So I decided to have some fun and give it a makeover. Images View all Images in thread Views: 76 Straight out of the box. Nice, works, but something missing. Views: 64 24 volt terminals on left, yellow and green must be shorted for PSU to work, 120 AC on right. Views: 85 Dual fan setup, should be good on the cooling. Views: 87 Based upon the mfr. provided dimensions, the front cap is modeled in Fusion 360. Openings for pushbutton on/off, XT90 panel mount plug, a pair of binding posts, and an IEC plug on the side. Views: 70 Modeled the back cap with holes same size as fans. Recessed screw holes on sides provided. Views: 84 Hours and hours of printing, modifying, and re-printing. Views: 78 spray-on filler/primer Views: 74 for both front and back caps Views: 22 Followed by lots of sanding Views: 16 Dug out my old airbrush, along with some left-over paint. Let's just wing it and see what I can come up with. Views: 20 Give it a faded look and let it dry. Views: 21 Not bad for an amateur Views: 25 Front fits perfectly. Different story for the back, was hard to slide in, had to file and sand some more. Views: 14 ok, lets wire it up. Put some LED lights inside so had to get a DC/DC buck converter. 3-D printed the XT90 panel mount and soldered the wires up. Views: 18 Vinyl wrap came in, first time wrapping something like this. I like the carbon-fiber look. Views: 21 Done, I'm happy with it, looks good if I say so myself. Views: 26 Maybe should've painted the XT90 panel mount, but still looks alright. Views: 16 Put on the PSU specs, and Progressive RC sticker that came shipped with it. Views: 17 Back cap turned out ok, fit up was tight for some reason, but managed to push it on with some effort. Views: 21 I like the IEC plug, keeps it clean, along with the recessed-beveled screw hole to keep it all flush. Views: 45 Powered up, lights on, and 24volt supplied power.
	Last edited by compass; Nov 05, 2018 at 11:56 PM.

Sign up now to remove ads between posts

Return to compass's blog

Quick Reply
The following errors occurred with your submission

Okay
Message: Posting Quick Reply - Please Wait

Thread Tools
Show Printable Version Email this Page

Similar Threads
Category	Thread	Thread Starter	Forum	Replies	Last Post
Discussion	How do I connect meanwell RSP-1000 in parallel	teeforb	Batteries and Chargers	0	Jan 22, 2013 03:21 AM
Discussion	MeanWell 1000-24 vs. 2 x Feather Merchant PSU	kouasupra	Batteries and Chargers	53	Feb 18, 2012 09:34 PM
Discussion	Meanwell RSP. How do u cover the open part?	teeforb	Batteries and Chargers	2	Nov 23, 2011 11:27 AM
Discussion	What's the difference between meanwell SE and RSP PSU?	teeforb	Batteries and Chargers	17	Nov 21, 2011 01:15 PM
Discussion	Has anyone used meanwell RSP-1500-27 PSU?	teeforb	Batteries and Chargers	15	Nov 17, 2011 07:04 PM

Copyright © Website Acquisitions Inc. All rights reserved.