Thread Tools
This thread is privately moderated by burkefj, who may elect to delete unwanted replies.
Oct 10, 2018, 09:34 AM
Registered User
burkefj's Avatar
Thread OP

Jonny Quest Dragonfly III

Here is the prototype for a custom kit I made for a customer, 34" long, 26" wingspan, 2" diameter, 10.5 oz rtf, Based on the Jonny Quest Dragonfly III, I lengthened the wing root and moved the wing/bottom scoop forward to have a reasonable CG, flew like a champ. Plenty of authority to flare and plop down on the grass and no issue with damage to the scoop. Sharpie fine line marker for panel lines, the canards are .03 styrene glued into slots in the nose cone I made with a dremel wheel, and the cockpit is shaped depron foam glued to the cone. Windows/glare shield is hand cut self adhesive vinyl. Elevon control and 24mm E-6 long burn rocket motor for boost.

Jonny Quest Dragonfly III RC Rocket glider (1 min 28 sec)
Last edited by burkefj; Oct 15, 2018 at 09:27 PM.
Sign up now
to remove ads between posts

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Jonny Quest! MtnGoat Life, The Universe, and Politics 27 Aug 24, 2012 03:22 PM
Discussion Jonny Quest! MtnGoat Life, The Universe, and Politics 3 Sep 20, 2010 02:56 PM
TP Gen III vs. Poly-Quest 20 mdelzer Batteries and Chargers 4 Dec 06, 2005 04:28 PM
dragonfly III BeechSkipperDude Electric Heli Talk 7 Feb 10, 2003 08:35 PM
Dragonfly Iii Wow rojoyinc Electric Heli Talk 5 Feb 17, 2002 12:38 PM