Mini FPV Wing Deal

HobbyKing has a new mini FPV wing out called the Swallow 670. It has a 670mm wingspan and it's made from EPP foam with carbon fiber reinforcements for strength and durability. There's plenty of room inside for your FPV gear too. They are selling it as an PNF for $75.77 or in a kit version for $43.75. It does have a 3 axis stabilizer included as well.

The PNF version comes with a 2205/2300kv brushless motor, a 30A ESC, 9g servos and 6x4.5 props. They suggest you use a 3S 1500mAH lipo battery to power it. This should be a fun little mini wing that you can throw in your car and go play.

Specifications:

• Wingspan: 670mm
• Length: 277mm
• Weight: 160g (without electronic equipment)

Included:

• 1 x 3-axis fight controller
• 1 x 30A BLHeli 2~4S Opto ESC
• 1 x 2205-2300KV Brushless Motor
• 2 x 9g Servo
• 2 x 6045 CW Propellers
• 2 x 6045 CCW Propellers

Required:

• 3~4CH Radio / Receiver (with Elevon Mixing)
• 1 x 1500mAh 3S Lipo battery

Optional:

• 1 x FPV Camera
• 1 x 5.8GHz Video Transmitter (for FPV)
• 1 x FPV Goggles or Screen (for FPV)
• 1 x Action Cam (if required)

Check out the H-King Swallow 670 FPV Flying Wing PNF Here


Check out the H-King Swallow 670 FPV Flying Wing Kit Here

H-King Swallow 670mm - HobbyKing Super Daily (2 min 58 sec)

is this a rebranded kit?I wonder if it would fly on a 2s li-ion using the srix nano goblin motor ?

Does it have the little flat spot for mounting a Mobius or Runcam upfront?

Originally Posted by cbear

is this a rebranded kit?I wonder if it would fly on a 2s li-ion using the srix nano goblin motor ?

I think most will use that power setup since
it's sooo proven

Originally Posted by Herrsavage

Does it have the little flat spot for mounting a Mobius or Runcam upfront?

It has two canopies and one has 42mm wide x 58mm length flat area set in (to front of canopy and nose drops down so 82 mm to end of nose up front, and because it sets in you lose about 15mm head room (@ 87mm from front of nose) inside up front where battery goes. HK changed the mold so a lot more room inside for battery now without front spar in the way.

Thanks. I considered the earlier/other version of this plane from Banggood, but quickly gave up after researching it and seeing all the mods required to get around the spar in the battery hatch etc.. So cool if HK got that sorted.

What does PNF mean?

Plug ‘n fly. It’s HK’s version of PNP.

Originally Posted by Herrsavage

Thanks. I considered the earlier/other version of this plane from Banggood, but quickly gave up after researching it and seeing all the mods required to get around the spar in the battery hatch etc.. So cool if HK got that sorted.

Looks like the Reptile S670 also has had the internal upgrades done to it now as it is being shown on Banggood.

How hard would it be to remove the stickers?

Originally Posted by Stalled

How hard would it be to remove the stickers?

If in keeping with others, fly it twice and they will fall off.

I assume they come ready fitted?

...

was considering to buy one to put a sk3 2500kv motor + fpv and a gopro session5 but im not sure it might be too small for so many items, also im affraid is not very stable

Originally Posted by Bravedan

If in keeping with others, fly it twice and they will fall off.

I assume they come ready fitted?

I just received mine, it is a box of bits.
The stickers are on a couple of sheets in the box.
The plug and fly version just has an extra bag of bits in the box.
You have to trim some of the foam and glue some bits together and solder up the motor, ESC and battery plug.

https://www.rcgroups.com/forums/show...7&postcount=19