Thread Tools
This thread is privately moderated by biglombo, who may elect to delete unwanted replies.
Sep 11, 2018, 06:56 AM
Registered User
biglombo's Avatar
Thread OP
Video

Betaflight 3.5 with feed forward - TBS source one | raw uncut | fpv freestyle | demon


Betaflight 3.5 with feed forward - TBS source one | raw uncut | fpv freestyle | demonRC inferno (4 min 9 sec)




Just tried betaflight 3.5 with stock settings (only set my rates) in this open field near my home. First impressions were pretty good, everything seems smooth, no vibrations and good feeling on the sticks. Next time I'll try to tune it a little bit (I'm non proper a master in tuning my quads...), change feed forward and see what happens! What do you think? Do you like the new firmware o do you prefer the 3.4?

PS: I heard that someone has some problem with battery life and short flight time. In this flight I got about 4 minutes in the air, not bad!

This is the setup used in this video:

Frame: Team black sheep source one
FC: Ominibus f4 aio
ESC: Airbot wraith 32 mini v2 35a
Motors: DemonRC inferno 2207.5 - 2550kv
VTX: Team black sheep unify HV
Antenna: Foxeer lollipop
Camera: Foxeer predator mini
Props: Dalprop cyclone 5040c
Rx: Crossfire nano with immortal T

I hope you enjoy and if you like what you see, please subscribe my channel! http://bit.ly/2y4wZgh .....THANK YOU!!!

-----------------------------------------------------

Check awesome products here:
FOXEER: http://www.foxeer.com/
DALPROP: http://dalprop.com/
AIRBOT: https://store.myairbot.com/
iFLIGHT: http://www.iflight-rc.com/
DEMONRC: http://demonrc.eu/

-----------------------------------------------------

Find me on facebook:
https://www.facebook.com/biglombo.fpv

Find me on Arivuz:
https://www.airvuz.com/user/biglombo-fpv/videos

Find me on Instagram:
https://www.instagram.com/biglombo_fpv
Sign up now
to remove ads between posts


Quick Reply
Message:
Thread Tools