Thread Tools
Oct 20, 2018, 10:04 AM
Registered User
What material is the foam core?
Sign up now
to remove ads between posts
Oct 20, 2018, 10:55 AM
Registered User
Looks a great model at a very attractive price.

In one of your posts you said you flew the Stark Pro, stuck with and forgot about the Auri, why was this and does that suggest that even with the new designed wing that the difference between the 2 isn't that large?

Thanks!
Mark
Last edited by i_am_mark_evans; Oct 20, 2018 at 11:01 AM.
Oct 22, 2018, 04:32 AM
Registered User
Neil Stainton's Avatar
The flying surfaces core is Rohacell.

We should receive a consignment of Auris this week.

Neil.
www.hyperflight.co.uk
Oct 23, 2018, 02:54 PM
Aka... Chris Graham
NutBag's Avatar
Looks to be great value and if it flies as well as it is promoted it will be a winner.

Most decent airframes are over $1300Au to land in Oz.. Auri is only $900 incl Shipping.
Last edited by NutBag; Nov 02, 2018 at 12:12 PM.
Oct 23, 2018, 04:07 PM
plays with toy planes
Looks super interesting! Do you have a US distributor?
Oct 24, 2018, 04:32 PM
Registered User
Hey everyone.I think I have the first Auri in the USA.
The quality is very good!
Just completed mine.
215 grams.No added weight .
Cg 63mm.
Will maiden today!
Will report back to this thread!
Marc
Oct 25, 2018, 02:47 PM
Registered User

Have New Auri for sale in the USA!


Call Marc at 8059045009
Or pm!Excellent value!$560 plus shipping. Possible local pick up in Southern California.
Marc
Oct 25, 2018, 03:10 PM
Aka... Chris Graham
NutBag's Avatar
For sale already?
Latest blog entry: Build Pics
Oct 25, 2018, 05:55 PM
Registered User
No I have mine ....we ordered 4 but one pilot reneged and didnt want it!didnt even look at it!
Oct 25, 2018, 07:51 PM
Aka... Chris Graham
NutBag's Avatar
Damn... that sucks!
Would grab it if you were closer.
Latest blog entry: Build Pics
Nov 01, 2018, 08:22 AM
Registered User
Thread OP
It's been a long time since I've been here...

Quote:
Originally Posted by barry d
Looks super interesting! Do you have a US distributor?
Not yet, we are just looking for someone to deal with. Any suggestions are welcom


Quote:
Looks a great model at a very attractive price.

In one of your posts you said you flew the Stark Pro, stuck with and forgot about the Auri, why was this and does that suggest that even with the new designed wing that the difference between the 2 isn't that large?

Thanks!
Mark
The difference is really not that large in active weather. It is only strongly noticeable in dead weather condition.
And I flew Stark Pro just because I have 3+ years of stick time with it and feel very familiar with it.
Some of contests this year I switched from Auri to SP and back from round to round just to test how they both perfom in current weather conditions and compare them side by side

And here are some pics of what we worked on last few weeks
Name: image1.jpg
Views: 210
Size: 702.5 KB
Description: Name: image2.jpg
Views: 162
Size: 597.5 KB
Description: Name: image3.jpg
Views: 177
Size: 643.5 KB
Description: Name: image4.jpg
Views: 169
Size: 578.6 KB
Description:
Nov 02, 2018, 10:51 AM
Registered User
Thread OP

Assembling guide #1


Here is a batch of photos to help some of you with assembling.

Wing assembling
Name: IMG_8397.JPG
Views: 284
Size: 1.31 MB
Description: Sand the peg to have better gripName: IMG_8397.JPG
Views: 263
Size: 1.31 MB
Description: Make sure it fit your fingers niceName: IMG_8395.jpg
Views: 303
Size: 634.5 KB
Description: On the wing tip mark the peg location. It must be 8 mm forward from aileronsName: IMG_8400.jpg
Views: 306
Size: 599.0 KB
Description: this is how it should look like
Name: IMG_8402.JPG
Views: 294
Size: 1.91 MB
Description: cut off 2-3 mm of carbon and remove the foamName: IMG_8405.JPG
Views: 315
Size: 1.52 MB
Description: place the peg in and make sure fit nicely. Then flue it in with some epoxyName: IMG_8406.JPG
Views: 351
Size: 2.35 MB
Description: draw the position of aileron's horns. They must be 3-4 mm from the cutName: IMG_8407.JPG
Views: 300
Size: 2.25 MB
Description: make sure hole on the horn and hinge line are on the same line to have no differential
Name: IMG_8409.JPG
Views: 285
Size: 1.72 MB
Description: sand horns before gluingName: IMG_8411.JPG
Views: 288
Size: 1.62 MB
Description: cut slots with a nife and make sure they fit nicelyName: IMG_8412.JPG
Views: 298
Size: 2.20 MB
Description: Name: IMG_8413.JPG
Views: 314
Size: 1.62 MB
Description:
Nov 03, 2018, 08:46 AM
Flying Low
cbarnes0061's Avatar
Looks great. Keep em coming.
Nov 14, 2018, 08:01 AM
Registered User
Neil Stainton's Avatar
We have Auri's in stock now.
See https://www.hyperflight.co.uk/products.asp?code=AURI
They look very nice!

Cost $520 + $116 US shipping.

Neil.


Quick Reply
Message:

Thread Tools