Shop our Airplanes Products Drone Products Sales
Thread Tools
Aug 26, 2018, 03:50 AM
Registered User
New Product

Beta75X 2S Whoop Quadcopter


Omg! 2s whoops - 75x first with 65x to follow apparently!

Name: 0_dc6d8c31-8694-47c0-bfdb-269a54124a39_345x@2x.jpg
Views: 77
Size: 42.1 KB
Description:

Name: 3_da7c8070-0e09-425a-9bb2-0b7e7d5f2f3c_345x@2x.jpg
Views: 66
Size: 40.6 KB
Description:

Name: 4_401b9680-ae6b-4fbe-8469-f0e6de8d6658_345x@2x.jpg
Views: 152
Size: 51.1 KB
Description:

Link to betafpv site:
https://betafpv.com/collections/2s-w...oop-quadcopter

Link to YouTube video:
https://m.youtube.com/watch?feature=...&v=dRY9dEAC_2w

Taken from link:

BULLET POINT:

Beta75X start a new era of 2S whoop drones.

With a big improvement in power, you could fly real acro, like a larger quad, but is still small enough, safe enough, and quiet enough to fly anywhere.

With the high performance STM32F405 processor FC boards and tuned Betaflight
Ominibus 3.5.0 firmware, everyone could fly the Beta75X drone like a racing professor.

Durable and light enough frame is customed for the Beta75X. A total weight of 41g give pilots a good balance of weight and nice punch on 2S battery.

Whole drone no soldering or tinkering necessary.

Customed lightest 1103 11000KV motors with cable connectors. Just plug and play.

300mAh 2S high rate battery is recommend in default. But pilot could also use their whoop batteries with a replaced power cable.

Optional and affordable.


SPECIFICATION
Weight: 41g (without battery)
Motors: 1103 11000KV with connector
Props: 40mm 4-blades props, 1.5mm shaft hole
Camera tilt angle: 35 degree
Recommend battery: 300mAh 2S
FC SPECIFICATIONS

Find more details about this 2S F4 FC board in another page.

CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
ESC SPECIFICATIONS

Find more details about this 2S ESC board in another page.

Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S lipo
Cotinue current: 6A
Peak current: 10A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Z02 AIO Camera VTX

Find more details about this AIO Z02 camera VTX in another page.

Output power: 0mW, 25mW and 200mW (Adjustable)
Smart Audio function is included for radio control

Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens
PACKAGE
1 * Beta75X BNF 2S Whoop Quadcopter
1 * Spare 40mm 4-blades props (2CW+2CCW)
1 * 300mAh 2S 35C-75C battery (Not for PNP version)
Last edited by Rishi; Aug 26, 2018 at 09:52 AM.
Sign up now
to remove ads between posts
Aug 26, 2018, 09:28 AM
Registered User
This looks really interesting!
Aug 26, 2018, 02:23 PM
Registered User
Is the radio rx standalone? the picture from the bottom side appears to show a separate rx from the fc. Or am am I seeing something else...
Aug 26, 2018, 04:41 PM
Registered User
Looks separate to me too from the image.
Aug 28, 2018, 12:33 PM
Registered User

1103 vs 1102


Why would they not use 1102 motors?

I have 8000KV 1103's on my elf x2 build.

1103's seem like they would be overkill for a 75mm whoop build.
Aug 28, 2018, 01:59 PM
humayraykinaon's Avatar
Quote:
Originally Posted by brain_spam
Is the radio rx standalone? the picture from the bottom side appears to show a separate rx from the fc. Or am am I seeing something else...
I see it separate as well and (if I'm not mistaken) think the receiver on the photo is a fullspeedrc frsky? It's very tiny, it weight almost to nothing.
Aug 28, 2018, 03:45 PM
monkeymagic
QuadifyRC.com's Avatar
Quote:
Originally Posted by LucasMcCain
Why would they not use 1102 motors?

I have 8000KV 1103's on my elf x2 build.

1103's seem like they would be overkill for a 75mm whoop build.
Most 1102 motors I've come across are no lighter than 1103s but yeah would otherwise agree
Aug 28, 2018, 06:34 PM
Registered User
I don't know how accurate the above weight is, but the Rakon Heli 2s delrin whoop is only 34g vs this quads 41g. Both running 1103s. 7g is quite a difference on a quad this light.
Aug 31, 2018, 12:03 PM
Registered User
I've seen some of the flight video and it does look promising, but the proof of the pudding is in the eating, so I'm reserving judgement for now.

As default these come with prop directions reversed as standard. The connector is xt30. The current meter is virtual not a real current sensor. The machine will come with a custom tune on bf 3.5. The camera mount gives a 35 degree camera angle.
Aug 31, 2018, 12:18 PM
Registered User
bguff88's Avatar
Hey guys! didn't realize there was an RCGroups page for the Beta75X but i'm glad I found it.

I am part of the collaboration/ design team (along with a couple other local pilots) that have been working with BetaFPV to design the Beta75X and bring it to the masses.

YT Videos are just now being released for this guy. Here's mine below:
BetaFPV - Beta75X | 2S 1103 Whoop | Overview and Flight (15 min 2 sec)



Come check out our group on Facebook! https://www.facebook.com/groups/277932932797118/

I'll do my best to help answer any questions in here
Sep 01, 2018, 02:48 AM
Registered User
What kind of flight times on 300mah?
Sep 01, 2018, 04:22 AM
Registered User
Quote:
Originally Posted by bguff88
Hey guys! didn't realize there was an RCGroups page for the Beta75X but i'm glad I found it.

I am part of the collaboration/ design team (along with a couple other local pilots) that have been working with BetaFPV to design the Beta75X and bring it to the masses.

YT Videos are just now being released for this guy. Here's mine below:
https://www.youtube.com/watch?v=fY2aHoSaZeQ&t


Come check out our group on Facebook! https://www.facebook.com/groups/277932932797118/

I'll do my best to help answer any questions in here

Welcome to the thread, thank you for your work on this amazing looking quad and cheers for your willingness to help with questions here (much appreciated).
Sep 01, 2018, 07:20 AM
Registered User
Quote:
Originally Posted by benz11
I don't know how accurate the above weight is, but the Rakon Heli 2s delrin whoop is only 34g vs this quads 41g. Both running 1103s. 7g is quite a difference on a quad this light.
I thought of the rakon whoop too, also the Hell whoop. Struggling to see what’s new here
Sep 01, 2018, 07:24 AM
Registered User
3DFun's Avatar
Still not sure 2s is the way to go for tight indoor tracks.
Hopefully some videos of people zooming this thing round a tight indoor track will change my mind
Sep 01, 2018, 01:42 PM
ɹǝsn pǝɹǝʇsıbǝɹ
ScottAllyn's Avatar
Quote:
Originally Posted by 5imon
Struggling to see what’s new here

The fact that it'll be ready to fly out of the box and will probably have a quality tune is a pretty big deal, imo. To those of us who can solder and/or like to tinker, that's not particularly significant, but to a lot of people, it probably will be.

Two other features that it has that are important to me that I don't believe the Rakon model has is a current meter and smart audio.

Plus... it's competition. The more 2S quads we see at this size, the better!
Last edited by ScottAllyn; Sep 01, 2018 at 01:54 PM.


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Micro Scisky MX Naze32 X 1S/2S Brushed Flight Control Board For Multirotor Quadcopter IKKI Mini Multirotor Drones 19 Dec 29, 2016 06:50 PM
Mini-Review GW007-1 Camera Quadcopter, 2S powered, direct drive motors SoloProFan Mini Multirotor Drones 13 Jun 14, 2016 11:00 AM
Discussion Whoop whoop apprentice Flyjohan23 Beginner Training Area (Aircraft-Electric) 6 Oct 07, 2015 07:32 AM
Discussion WHOOP WHOOP It's Da Police ENGINETORQUE Life, The Universe, and Politics 0 May 10, 2014 08:04 AM