Thread Tools
Aug 10, 2018, 03:52 PM
Registered User
Hubert1's Avatar
Thread OP
Discussion

Decent servo for continous rotation?


So I have an eitech crane and all of the motors have at least one gear stripped. I would like to get it working again after several years of just sitting there. BUT, new motors cost quite a bit, so I was wondering if there are any decent servos that can be easily modded around the $30 price range.

Any help would be appreciated.

Hubert.
Sign up now
to remove ads between posts
Aug 18, 2018, 02:46 PM
Fly safe, fly often!
Buzz_Man's Avatar


Practically all inexpensive servos can be modified for continuous rotation

LINK
Aug 17, 2019, 07:04 AM
Registered User
I used a couple of these on a tracked vehicle. 83 oz.-in continuous rotation.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

There are also a lot of cheap, small, generic motor/gearbox combos out there like these:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
or these
https://www.amazon.com/dp/B01C6MGK7G...d_i=B01BBSXDJ4


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion **** GWS Servo - S35 Continous Rotation **** RAY GWS Product Announcements 1 Mar 07, 2014 12:28 AM
Question Continous rotation servos for camera stablization IconFlyer Aerial Photography 9 Oct 04, 2011 02:22 PM
Help! modifying a standard servo for continous rotation bgnome Radios 15 Jun 02, 2011 09:43 PM
Help! Continous rotation servo? Jon NFL Scale Boats 13 Feb 14, 2006 08:36 AM
Modifying a servo for continous rotation? Ben74 Radios 5 Dec 14, 2002 01:10 PM