Thread Tools
Old Mar 03, 2002, 08:04 PM
SteveR is offline
Find More Posts by SteveR
Registered User

Collet Style Prop Adapter or Spinner


Have a Hacker B40 18S motor (no gearbox) with a 3.2 mm shaft that's going in a Ripmax Alliance pattern plane. Looking for a very good collet style prop adapter or spinner for non-folding prop. Want to avoid units that use set screws to grip the motor shaft.

Any brand/model suggestions?

Thanks,

Steve
Sign up now
to remove ads between posts
Old Mar 03, 2002, 09:27 PM
Gerald is offline
Find More Posts by Gerald
ὅπερ ἔδει δεῖξαι
Gerald's Avatar
Check out the prop adapters by Graupner. You can use the 1/8" or 3.2mm interchangably.

http://www.hobby-lobby.com/propadap.htm

The GR1095 or GR1269 should work.
Old Mar 03, 2002, 10:42 PM
Steve H. is offline
Find More Posts by Steve H.
Registered User
Or get em for half the price from Azarr

http://www.azarr.com/propsandadaptors.htm
Old Mar 03, 2002, 11:03 PM
Chris True is offline
Find More Posts by Chris True
Registered User
Azarr's adapters are really outstading - highly recommended.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
4mm Collet type prop adapter spins on shaft jhamm Power Systems 2 Jan 02, 2005 01:09 AM
Aero-naut collet type prop. adapter with two folders Eflyer14 Aircraft - Electric - Airplanes (FS/W) 1 Oct 18, 2004 07:53 PM
What size prop adapter or B40 Bill Germanson Power Systems 5 Feb 13, 2004 01:07 PM
Bullet nose collet style Prop Adapter for 4mm? Jim Miller Scale Kit/Scratch Built 6 Aug 13, 2003 04:41 PM
What prop adapter or spinner ? zorro Power Systems 0 Apr 09, 2003 10:40 AM