|
|
Thread OP
|
Discussion
Jumper T12 Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module
Hi all, the Jumper T12 is now being officially announced. Pre-production samples are just about ready to ship out to testers and reviewers. Official sale date TBA. RRP $89.90
Official Jumper Website Follow us on facebook Wholesale & Dealer enquiries Thanks! Hobby Porter Team. Jumper T12 Open Source 16ch Radio with JP4-in-1 Multi-protocol RF Module The Jumper T12 brings the best features of the T8SG v2 series and bundles them together with JumperTX an open source Firmware set based on the OpenTX Project. Compatible with JR style RF modules the T12 comes with the JP4-in-1 Multi protocol module as standard You asked, we listened. One of the most asked questions when the T8SG v2 was release was will it work with TBS Crossfire. We are happy to announce the T12 version does indeed support Crossfire and in CRSF mode with LUA script support and most importantly WITHOUT any hardware modification for end users. If your looking for the most compact, most affordable and most EPIC Crossfire compatible TX in the market today look no further than the Jumper T12. Jumper is committed to supporting OPEN hardware module platforms and will never try to force customers on to proprietary equipment. Keep it simple, keep it affordable. The T12 platform is shipped with the JP4-in-1 Multi-protocol module. If you already own JR Modules such as the TBS Crossfire or any other JR Module compatible 2.4ghz, Analogue or Long Range UHF system the T12 is ready to rock out with its socket out! A standard LCD screen was used along with the T8SG V2 butter smooth V2 gimbals offering quality, usability and best of all affordability. Goodies included The T12 comes standard with a neck strap and AA battery tray. The T12 can also be powered with any LiPO or LiFE battery of a compatible size meaning users do not need to source their own uncommon sized Li-ion round cells or a round cell charger. Seamless Integration The T12, when paired with the Jumper JP4-in-1 offers seamless intergration between JumperTX (an open source Firmware set based on the OpenTX Project) and module meaning protocals can be accessed and selected directly from the software GUI. Crossfire users can setup their equipment via LUA scripts Radio Features: JumperTX (an open source Firmware set based on the OpenTX Project) JR/FrSKY compatible module bay on rear side (module not included) USB online firmware upgrade Ultra-low power consumption, longer battery life Channels: up to 16 channel output Wide voltage input (2s lipo recommended) Multilingual menu Vibration reminder function Support telemetry (depending on the receiver) Crossfire CSRF Compatible: Yes LUA Script support: Yes Radio Specs: Radio MCU: STM32F205VET6 (512kb) Size: 158 * 150 * 58 Weight: 342g (without battery) Working voltage: DC5-DC9V (factory with 4 * AA battery box, 2s Lipo recommended, batteries not included) Firmware: OpenTX Channels: up to 16 channel output Display: 1.7-inch LCD display, 128* 64 resolution Gimbal Type: Potentiometer JR/FrSKY compatible module bay on rear side Upgrade method: USB online upgrade Simulator mode: 3.5mm standard ppm output or USB HID Voice support: YES Jumper JP4-in-1 Module The Jumper JP4IN1 Module features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board. This module can convert standard PPM signals form module equipped radios in to the RF protocols used by most radios in the market today (See RF Chip data below). This module is plug and play with module equipped radios in the FrSKY series and requires no complex wiring or “hacking” to get running. The module is a great way to improve the enjoyment of your flying experience, using a better radio such as the FrSKY Taranis series rather than the low grade radios commonly included with most kits offers an night and day difference in performance. The Jumper JP4IN1 module is also upgradable via USB input JP4-in-1 Specifications: Working voltage: 6-9v Working current: <=100ma Operating frequency: 2.4G ISM band RF power: +22DBM Main control chip: STM32F103CBT6 (128K ROM, 20K RAM) Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna) Net Weight: 42g (including antenna) Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x Firmware updatable: Yes, via USB. RF Chip Data Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo Texas Instruments CC2500: FrSky, Futaba SFHSS Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models OpenTX Firmware is developed by the OpenTX team. Full credit is given to the developers of OpenTX. Please visit http://www.open-tx.org/ to learn more Final specs are subject to change. |
|
Last edited by Hobby Porter; Aug 14, 2018 at 11:47 PM.
|
|
|
||
|
Quote:
And the part where it is mentioned is a direct quote from 4-in-1 module specs. Taranis is running on F2 family with at least 2 times bigger memory and more IO lines. |
|
|
||
|
|
Thread OP
|
Hi all, thanks for the input and questions. The Radio its self uses an STM32F205VET6 (512kb).
|
|
|
|
|
|
The FCC ID is 2ANTI-T12 but the odd thing it's only for the CC2500 part. The other three transeivers are supposedly deactivated.
|
|
Last edited by Kambalunga; Jul 15, 2019 at 02:17 AM.
|
|
|
|
So the Jumper JP-4 has no FCC approval?!
|
|
Last edited by Kambalunga; Jul 15, 2019 at 02:17 AM.
|
Thread Tools | |
Similar Threads | |||||
Category | Thread | Thread Starter | Forum | Replies | Last Post |
Discussion | New version Jumper T8SG Multi-Protocol 10CH Compact Transmitter with 4 in 1 module | YSeph | Radios | 1590 | Feb 11, 2024 11:39 AM |
New Product | 4 In 1 RF Module With Case (Multi Protocol) [JR, FRSKY, Futaba] | nitbeat | Radios | 23 | Apr 07, 2022 07:35 PM |
Alert | Jumper T8SG Multi Protocol Radio $69.99 | fastmax | Radios | 0 | Jan 15, 2018 05:13 PM |
Help! | Banggood 4-IN-1 Multi-protocol STM32 TX Module With Antenn | Bravedan | Banggood.com | 0 | Aug 27, 2017 08:58 AM |