Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by Xavier143, who may elect to delete unwanted replies.
Jul 07, 2018, 03:28 PM
Trader Rating: 0
Lifelong member
$225.00 USD
Buyer pays shipping
For Sale


I started building this FPV-Rover for night recon projects but have now changed carrier paths and its no longer needed.
I originally found the tank plains and list of parts from: You will need to print out a few parts to complete the tank.

I put in quiet a bit of time researching and collecting the parts which are not easy to find anymore. I've printed out 3/4th of the tank.
Hope someone out there will benefit from the time spent, making this a turn key project.

The only thing needed is to print out the following:
1x body (for 2S or 3S)
1x front
1x back
1x top
I started printing TPU treads to add to the tracks but did not finish printing them out.
56x rubber track if you want to add them.

Printed parts already printed out with PETG:
64x track
64x pins
8x small cog
4x main cog
1x inner track frame right
1x inner track frame left
2x outer track frame
2x track outer cover
1x set track-body-connector
1x tow-bar
2x tow-bar plug
1x fpv-cam-holder
1x set camera-led-mount
1x led mount

Track inner and outer frames plus gear cogs and bearings have already been assembled as seen in the pictures.

Parts included:
1 2x 688ZZ bearings $5.30 banggood
2 X4 motors $7.24 banggood
3 X2 brushed ESC's 20A $16.80 banggood
4 x10 6802ZZ bearings $4.91 banggood
5 X1 RunCam Owl Plus $45.00 getfpv
6 X1 Infrared-LED's $10.00 not sure
7 X1 power supply for Infrared LED's $5.50 Ebay
8 X1 rear camera $7.00 banggood
9 X1 FPV switch $5.00 banggood
10 x100 micro 3mm X 1mm N35 Rare Earth Neodymium Magnets $3.00 banggood
11 X1 12V DC 40mm Cooling Fan $2.00 banggood
12 X2 CYS S0005 Servos $6.00 AliExpress
13 X1 RedRotor OSD Pro (RROSD) V2 Power dis board $30.00
14 X1 FrSky S-FHSS 8CH Delta-8 Receiver For Futaba T6J T8J 4PL 14SG Transmitter $30.00 banggood
15 X1 Turnigy iA6C PPM/SBUS 8CH 2.4G AFHDS 2A Telemetry Receiver included for FREE
16 X5 X60 battery connectors for PDB included for FREE
17 X1 VTX circular polarized antenna included for FREE
18 some hardware and glue included for FREE

13 X4 Upgraded motors Professor Motor PMTR1032 (Impossible to find) $30.00
14 X2 Lumenier 1800mAh 3s 35c Lipo Battery $40.00
15 X1 TBS Unify Pro HV 5G8 - Race (SMA) $30.00 getfpv
16 about $35 worth in filament for printed parts

Total price for all parts $312.75 (Not including the shipping and handling spent). I'm only asking $225.00 here on RCGroups. This is a great deal when you consider the time spent searching all the parts down and printing the parts out. Lets just say I spent about 1 1/2 months waiting for all the parts to be shipped.

Also listed on Ebay
Last edited by Xavier143; Jul 08, 2018 at 12:27 AM.
Sign up now
to remove ads between posts
Jul 10, 2018, 10:29 PM
Trader Rating: 0
Lifelong member
Price reduction now only $150

Quick Reply
Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Video FPV Control Station and Squid Rover steelsquid Off-road Cars 12 May 03, 2016 09:07 AM
Sold FPV Rover MQ_FUN FPV Equipment (FS/W) 5 Jan 08, 2016 10:37 PM
Build Log 1/5 scale FPV sentry rover icah Robotics 13 Feb 05, 2014 01:49 AM
Discussion HK robot-rover FPV? any thought modelerchina FPV Talk 2 Nov 14, 2012 12:38 PM