Smallest flying wing? - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 28, 2002, 04:07 PM
Registered User
snowman610620's Avatar

Smallest flying wing?

What is the smallest flying wing out there? Ths PAF has a wingspan of 30" Is there anything smaller. I'm looking to fly in a backyard. My zagi 400 is too big for the backyard. I was just looking at the wedgie because it turns tight but I think it is FAST. Can it fly slow? Any suggestions for my next plane would be great
Sign up now
to remove ads between posts
Feb 28, 2002, 04:20 PM
Havin FUN
Gonnacrash's Avatar

Take a look .

Take a look at the "Pop-Fly" there are several forums in E-zone if you do a search. The site used to have a video, but I think its been deleted. Ck it out !
Last edited by Gonnacrash; Feb 28, 2002 at 04:22 PM.
Feb 28, 2002, 04:52 PM
Registered User

Small you want?

Small you want?

How bout expensive?

I think 40,000$ is not enough to buy one of the .020 powered ones.

OK it,s slime but still.

Ron Parigoris
Feb 28, 2002, 05:48 PM
Making Cuisinarts Fly!!!!
Go here.

Someone had converted these to RC at DEAF. Flew great even in the wind. I think he had 2 N20 motors on it with elevons.
Feb 28, 2002, 09:28 PM
Registered User


Primarily known, I suppose, for the Tilde, you might want to take a look at Birdworks does offer some other GWS power type small electrics, most notably the Bud.

Worth consideration.

At 16" the future Chip would probably be the smallest.
Mar 01, 2002, 07:27 PM
Acer's Avatar

24" wing glider

Just thought I would throw this in. Here's a picture of my 24" wing I cut out of blue foam. I used a modified MH45 airfoil. The root is 7.5 inches and the tip is 4 inches. It's extremly aerobatic and can spin like a drill. Launches about 80-100 feet up. I'm sure it would do great with a GWS power system but never got around to putting one on as it is so much fun already. All up weight is 3 oz.

If you can't find a wing you could always make your own. Its very easy and I'm sure someone could help you if you needed it. From cutting to finish it took about two hours to build the 24".

Here's a pic with the 24" next to my 42" glider I also designed.
Last edited by Acer; Mar 01, 2002 at 07:31 PM.
Mar 01, 2002, 07:42 PM
Registered User
Nice little cutie!!!
Mar 01, 2002, 07:51 PM
Tacoma, WA, USA
William A's Avatar

Re: Smallest flying wing?

Originally posted by snowman610620
I'm looking to fly in a backyard.
May I suggest the IFO by Wild RC,

Its a great backyard flyer and almost handles like a zagi.
Mar 02, 2002, 11:50 AM
Acer's Avatar

Where to get GWS motor?

Well, now I want to build another 24" wing. Does anyone know where I can get the GWS motor/gearbox? Which one would work best, the "A" version? Also, what batteries would work well with this wing/power combo?
Mar 02, 2002, 12:00 PM
Making Cuisinarts Fly!!!!
I'm not into the smaller GWS stuff but has som interesting small geardrives under the slow fly parts section.

If there is something you need that is not on the website call them their store has alot of things in stock that have not made it to the website.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log UAV Wing Wing Z-84 (845mm) - Built 72.6km long range, lightest and the smallest. ican3d UAV - Unmanned Aerial Vehicles 9 May 23, 2017 10:41 PM