Thread Tools
Apr 12, 2007, 08:31 AM
Prefectionist
Peter,

Unfortunetly, No, I don't have any CAD software that can handle ether of those formats. Thank you for checking though. I need to get some real cad software ;-)

Dave.
Sign up now
to remove ads between posts
Apr 12, 2007, 09:19 AM
Prefectionist

Mini SE5A


Quote:
Originally Posted by pmjass
Ha Ha,
I can laugh. I've had a couple do the twist in my hand. They wrap up tight very quickly.

Tell me more about the motor. Star/Delta? Wire gauge? Static Amps?
It sounds like a good set up. I've wound three motors so far although they have all been the Aircraft-World type motors. If haven't tried a GB motor yet.

Do you think there would be much interest in a mini SE5A. I have the plans for
the outdoor version and it wouldn't take much to scale it down for 3mm depron. I like multiwings when using 3mm Depron as the wingspans are shorter and the struts provide bracing consequently it is a lot easier to get a stiffer structure.

Peter
Peter,

Did you ever produce the indoor plans for the SE5A? I would love to be able do dogfight in a gym with snoopy and the red barron.
May 25, 2008, 02:24 PM
Registered User

epp baron


i have just finished baby baron in 5mm epp, used carbon strip in the wings and wider wing joiners otherwize as per plans, not flown yet waiting for calm weather, has any one else done this if so how did it go? using 450mah 2 cell lipo and 80w brushless motor. handles great on the living room floor.
Sep 05, 2008, 07:54 AM
Registered User
I'm planning on making this little wonder... Would a 24gr 1300KV would do the trick? Or should I put it in a gearbox to reduce the KV?

Cheers,
Niels R.
Sep 30, 2008, 02:00 PM
Registered User
brantley's Avatar
For anyone thinking of building this great little aircraft, I have been given permission from kzey at Digital Millworks (who used to produce the kit) to post a copy of their excellent build manual.

Enjoy.
Jan 25, 2009, 07:12 AM
Registered User
I have built the baby baron the result is great, and only one question remains:Where is the center of gravity? I would be very greatful if anyone could help me whith this.
Morten Mathisen
Norway
Jan 25, 2009, 07:30 AM
Registered User
Page 3 of pdf manual file in post # 200 right above yours:

3/15/05 ver 0.9 to version 1.0
o Added brushed motor information to specs
o Changed recommended starting C.G. to 1 1/8th inch back on middle wing
o Added note to apply packing tape to aileron surfaces to reduce flex for outdoor flight.
Feb 19, 2009, 03:35 AM
Team FlightPower AUS
pmjass's Avatar
Morten,
any pics, have you flown it yet?

Peter
Feb 21, 2009, 07:10 AM
Registered User

Pictures of th baby baron


I've now built the baby baron, and I thought someone may be interested in some pics.
It flies great. I'm now building the big one for outdoor, an I'm looking forward to the spring, and the withdrawal of the cold Norwegian winter.

Morten Mathisen
Norway

I have taken a great interest in WWW1 planes, if someone has drawings I would be most grateful if you could post them to me:
mormathi@online.no
Last edited by mormathi; Feb 21, 2009 at 07:29 AM. Reason: Missing pictures
Feb 22, 2009, 03:55 PM
Team FlightPower AUS
pmjass's Avatar
Looks good Morten.


I see you added a flying axle.
Apr 18, 2010, 08:59 AM
Registered User
i have just started on this plan, and im stuck at the undercarriage construction part. can some1 enlighten me how to construct? wad size rods/accessories/joints do i have to get?
Oct 13, 2010, 12:10 PM
Registered User
Thought I'd revive this thread and show a couple of pics of mine. Basically standard and hand painted in artists acrylics. I test flew it at the UK Nationals where it was middaired on the Sat evening Out with the UHU POR and some cyano and it was going again the following evening. It still shows some signs of battle, since the fuselage was in two, as were the wings all the struts and tailplane!!!

An ace design, many thanks for sharing.

Ian.

nats 2010.mp4 (1 min 33 sec)
Oct 13, 2010, 12:16 PM
Registered User
.....and a couple of flying pics. I could've edited my balding pate but I aint that vain. Apologies to all it offends

Ian.
Oct 13, 2010, 02:58 PM
Team FlightPower AUS
pmjass's Avatar
Wow,
great job with the build. Your model looks fantastic. I quickly looked at the pictures and thought that's not my version. It has a full fuz, closer inspection revelaed the T section.

Of late I have been considering reviving my foamy WWI foamies design activities your post may just have provided enough spark to get me going again. I have some camel plans almost finished and I was thinking of re-doing the DR-1 with a central crutch. From some aspects the T looks great from other angles it looks a little ugly.

Thanks for posting.

Regards,

Peter
Mar 12, 2012, 08:26 AM
Building until we fly w\ Jesus
Shawndae's Avatar
Well I tried my hand at my first foam build. Made one of each size. I must so that after building many wood and ARF kits I am now also hooked on building with foam sheet.

Here is a shot of my new toys that I just flew over the weekend.



Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Red Baron 3D vs. Flying Corps Looooeeee! Life, The Universe, and Politics 8 Jul 16, 2004 11:57 PM
Has anyone managed to get the Red Baron Reno Racer to fly? PETERRAKE Scale Kit/Scratch Built 6 May 22, 2002 02:07 PM
Mustang Reno Racer "Red Baron" Troy High Performance 5 Mar 28, 2002 12:05 PM
Red Baron Wannabe RCFlybry Parkflyers 12 Nov 08, 2001 11:20 PM
Red Baron - 3D Hans Electric Plane Talk 1 Jul 22, 2001 12:37 AM