Thread Tools
Old May 05, 2001, 04:12 PM
Jedd is offline
Find More Posts by Jedd
Registered User

Grumman Albatross Flaps?

I noticed in the Aspach 2000 pt 1 report that Christian Ramoser's albatross has flaps. I'll bet thats why he can take off the water at half throttle. Well, that and those cool props! Anyone done this to this plane. I am just about to start building mine, but would really like some help in adding the flaps (size, etc.). Any other tips or suggestions on building this plane would be greatly appreciated!

Sign up now
to remove ads between posts
Old May 06, 2001, 01:08 AM
Steve_S is offline
Find More Posts by Steve_S
Registered User
Hi Jedd,

I am also building this model. I have been asking questions too. Please see the links below for some good info.

I have made the wing tips from balsa blocks since I did not like the fit of the ABS ones.
Also, I am using golden rods rather than the ones in the kit. I can not help you with flaps.
Old May 06, 2001, 08:56 PM
temacc is offline
Find More Posts by temacc
Why not ask Christian about how he did his flaps? Email me privately and I will give you his address.

Those totally cool props are available from EAM, a company whose URL you can find in the list of advertisers on Ezoneman. I was taken to heaven when I assembled, then flew and tweaked my Albatros, with the 3-blade VarioProps. So now I have a 3-bladers coming for my X-250!

Old May 10, 2001, 09:35 PM
Jedd is offline
Find More Posts by Jedd
Registered User
I received the dimensions for the flaps from Christian Ramoser. Here's some pics of how it's coming along. The flaps are 32mm x 315mm with 40mm between aileron and flap. I also received two three blade varioPROPS today. These things are VERY COOL! The best quality electric prop I've ever seen.


[This message has been edited by Jedd (edited 05-10-2001).]

[This message has been edited by Jedd (edited 05-14-2001).]

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Motor calculations for Grumman Albatross Van Power Systems 2 Apr 22, 2009 06:14 PM
Grumman Albatross Hu-16 In Los Angeles CESARNOGUEIRA Scale Kit/Scratch Built 1 Jul 22, 2002 06:01 PM
Question: should I gear down a Grumman Albatross? Van Scale Kit/Scratch Built 4 Jan 31, 2002 08:34 AM
Paint for Grumman Albatross? Jedd Scale Kit/Scratch Built 11 May 30, 2001 11:53 PM
GRUMMAN ALBATROSS VIDEO-ANYONE? CESARNOGUEIRA Electric Ducted Fan Jet Talk 0 May 26, 2001 11:47 AM