Thread Tools
Feb 13, 2018, 02:42 AM
Registered User
Discussion

Dual PowerLab 8 touch two different power supplies


Hi,

is it possible and recommended to use two different power supplies with a Dual PowerLab 8 touch e.g. 30V for one "half" and 18V for the other "half"?
I am aware that a common ground is needed ;-).

My gut felling tells me that it may not be the smartest idea to do?

Many thanks in advance

Stefan
Sign up now
to remove ads between posts
Feb 13, 2018, 02:01 PM
Sindland MC SAA
Howard Matos's Avatar
Quote:
Originally Posted by Steber1981
Hi,

is it possible and recommended to use two different power supplies with a Dual PowerLab 8 touch e.g. 30V for one "half" and 18V for the other "half"?
I am aware that a common ground is needed ;-).

My gut felling tells me that it may not be the smartest idea to do?

Many thanks in advance

Stefan
Good Day,

There is only a single input on the Dual PowerLab 8 Touch so you cannot split the voltage.
Feb 13, 2018, 02:21 PM
Registered User
Many thanks

So my assumption that the "Touch" is simillar to the PL8 was wrong ;-(
Feb 14, 2018, 09:49 AM
Sindland MC SAA
Howard Matos's Avatar
Quote:
Originally Posted by Steber1981
Many thanks

So my assumption that the "Touch" is simillar to the PL8 was wrong ;-(
I would say very different.


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Torn between PowerLab 8, Dual PowerLab, and iCharger 4010 CC268 Batteries and Chargers 88 Today 11:36 AM
Question Best Power Supply for Powerlab 8? Riouken Batteries and Chargers 24 Today 07:00 AM
Discussion Sizing Power Supply for 2x Cell Pro Dual 8 IOG Batteries and Chargers 12 Jul 06, 2017 11:57 AM
Discussion Quality 24V Power Supply for PowerLab 8 v2? CC268 Batteries and Chargers 4 Sep 29, 2016 11:38 AM
Discussion Dell PE6800 Power Supply’s powers 2 FMA Powerlab 8’s.Completed KAW_Concours Batteries and Chargers 5 Sep 18, 2011 08:00 AM